[PATCH 1/1] mm: Fix a deadlock in the hotplug code

[PATCH 1/1] mm: Fix a deadlock in the hotplug code

[K. Y. Srinivasan]

Andy Whitcroft <apw@canonical.com> initially saw this deadlock. We have
seen this as well. Here is the original description of the problem (and a
potential solution) from Andy:

https://lkml.org/lkml/2014/3/14/451

Here is an excerpt from that mail:

"We are seeing machines lockup with what appears to be an ABBA deadlock in
the memory hotplug system.  These are from the 3.13.6 based Ubuntu kernels.
The hv_balloon driver is adding memory using add_memory() which takes the
hotplug lock, and then emits a udev event, and then attempts to lock the
sysfs device.  In response to the udev event udev opens the sysfs device
and locks it, then attempts to grab the hotplug lock to online the memory.
This seems to be inverted nesting in the two cases, leading to the hangs below:

[  240.608612] INFO: task kworker/0:2:861 blocked for more than 120 seconds.
[  240.608705] INFO: task systemd-udevd:1906 blocked for more than 120 seconds.

I note that the device hotplug locking allows complete retries (via
ERESTARTSYS) and if we could detect this at the online stage it
could be used to get us out.  But before I go down this road I wanted
to make sure I am reading this right.  Or indeed if the hv_balloon driver
is just doing this wrong."

This patch is based on Andy's analysis and suggestion.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
---
 mm/memory_hotplug.c |   24 +++++++++++++++++-------
 1 files changed, 17 insertions(+), 7 deletions(-)

diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 9fab107..e195269 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -104,19 +104,27 @@ void put_online_mems(void)
 
 }
 
-static void mem_hotplug_begin(void)
+static int mem_hotplug_begin(bool trylock)
 {
 	mem_hotplug.active_writer = current;
 
 	memhp_lock_acquire();
 	for (;;) {
-		mutex_lock(&mem_hotplug.lock);
+		if (trylock) {
+			if (!mutex_trylock(&mem_hotplug.lock)) {
+				mem_hotplug.active_writer = NULL;
+				return -ERESTARTSYS;
+			}
+		} else {
+			mutex_lock(&mem_hotplug.lock);
+		}
 		if (likely(!mem_hotplug.refcount))
 			break;
 		__set_current_state(TASK_UNINTERRUPTIBLE);
 		mutex_unlock(&mem_hotplug.lock);
 		schedule();
 	}
+	return 0;
 }
 
 static void mem_hotplug_done(void)
@@ -969,7 +977,9 @@ int __ref online_pages(unsigned long pfn, unsigned long nr_pages, int online_typ
 	int ret;
 	struct memory_notify arg;
 
-	mem_hotplug_begin();
+	ret = mem_hotplug_begin(true);
+	if (ret)
+		return ret;
 	/*
 	 * This doesn't need a lock to do pfn_to_page().
 	 * The section can't be removed here because of the
@@ -1146,7 +1156,7 @@ int try_online_node(int nid)
 	if (node_online(nid))
 		return 0;
 
-	mem_hotplug_begin();
+	mem_hotplug_begin(false);
 	pgdat = hotadd_new_pgdat(nid, 0);
 	if (!pgdat) {
 		pr_err("Cannot online node %d due to NULL pgdat\n", nid);
@@ -1236,7 +1246,7 @@ int __ref add_memory(int nid, u64 start, u64 size)
 		new_pgdat = !p;
 	}
 
-	mem_hotplug_begin();
+	mem_hotplug_begin(false);
 
 	new_node = !node_online(nid);
 	if (new_node) {
@@ -1684,7 +1694,7 @@ static int __ref __offline_pages(unsigned long start_pfn,
 	if (!test_pages_in_a_zone(start_pfn, end_pfn))
 		return -EINVAL;
 
-	mem_hotplug_begin();
+	mem_hotplug_begin(false);
 
 	zone = page_zone(pfn_to_page(start_pfn));
 	node = zone_to_nid(zone);
@@ -2002,7 +2012,7 @@ void __ref remove_memory(int nid, u64 start, u64 size)
 
 	BUG_ON(check_hotplug_memory_range(start, size));
 
-	mem_hotplug_begin();
+	mem_hotplug_begin(false);
 
 	/*
 	 * All memory blocks must be offlined before removing memory.  Check
-- 
1.7.4.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH 1/1] mm: Fix a deadlock in the hotplug code

[Yasuaki Ishimatsu]

(2014/12/03 5:46), K. Y. Srinivasan wrote:
> Andy Whitcroft <apw@canonical.com> initially saw this deadlock. We have
> seen this as well. Here is the original description of the problem (and a
> potential solution) from Andy:
> 
> https://lkml.org/lkml/2014/3/14/451
> 
> Here is an excerpt from that mail:
> 
> "We are seeing machines lockup with what appears to be an ABBA deadlock in
> the memory hotplug system.  These are from the 3.13.6 based Ubuntu kernels.
> The hv_balloon driver is adding memory using add_memory() which takes the
> hotplug lock, and then emits a udev event, and then attempts to lock the
> sysfs device.  In response to the udev event udev opens the sysfs device
> and locks it, then attempts to grab the hotplug lock to online the memory.
> This seems to be inverted nesting in the two cases, leading to the hangs below:
> 
> [  240.608612] INFO: task kworker/0:2:861 blocked for more than 120 seconds.
> [  240.608705] INFO: task systemd-udevd:1906 blocked for more than 120 seconds.
> 
> I note that the device hotplug locking allows complete retries (via
> ERESTARTSYS) and if we could detect this at the online stage it
> could be used to get us out.  But before I go down this road I wanted
> to make sure I am reading this right.  Or indeed if the hv_balloon driver
> is just doing this wrong."
> 
> This patch is based on Andy's analysis and suggestion.

How about use lock_device_hotplug() before calling add_memory() in hv_mem_hot_add()?
Commit 0f1cfe9d0d06 (mm/hotplug: remove stop_machine() from try_offline_node()) said:

  ---
    lock_device_hotplug() serializes hotplug & online/offline operations.  The
    lock is held in common sysfs online/offline interfaces and ACPI hotplug
    code paths.

    And here are the code paths:

    - CPU & Mem online/offline via sysfs online
        store_online()->lock_device_hotplug()

    - Mem online via sysfs state:
        store_mem_state()->lock_device_hotplug()

    - ACPI CPU & Mem hot-add:
        acpi_scan_bus_device_check()->lock_device_hotplug()

    - ACPI CPU & Mem hot-delete:
        acpi_scan_hot_remove()->lock_device_hotplug()
  ---

CPU & Memory online/offline/hotplug are serialized by lock_device_hotplug().
So using lock_device_hotplug() solves the ABBA issue.

Thanks,
Yasuaki Ishimatsu

> 
> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
> ---
>   mm/memory_hotplug.c |   24 +++++++++++++++++-------
>   1 files changed, 17 insertions(+), 7 deletions(-)
> 
> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> index 9fab107..e195269 100644
> --- a/mm/memory_hotplug.c
> +++ b/mm/memory_hotplug.c
> @@ -104,19 +104,27 @@ void put_online_mems(void)
>   
>   }
>   
> -static void mem_hotplug_begin(void)
> +static int mem_hotplug_begin(bool trylock)
>   {
>   	mem_hotplug.active_writer = current;
>   
>   	memhp_lock_acquire();
>   	for (;;) {
> -		mutex_lock(&mem_hotplug.lock);
> +		if (trylock) {
> +			if (!mutex_trylock(&mem_hotplug.lock)) {
> +				mem_hotplug.active_writer = NULL;
> +				return -ERESTARTSYS;
> +			}
> +		} else {
> +			mutex_lock(&mem_hotplug.lock);
> +		}
>   		if (likely(!mem_hotplug.refcount))
>   			break;
>   		__set_current_state(TASK_UNINTERRUPTIBLE);
>   		mutex_unlock(&mem_hotplug.lock);
>   		schedule();
>   	}
> +	return 0;
>   }
>   
>   static void mem_hotplug_done(void)
> @@ -969,7 +977,9 @@ int __ref online_pages(unsigned long pfn, unsigned long nr_pages, int online_typ
>   	int ret;
>   	struct memory_notify arg;
>   
> -	mem_hotplug_begin();
> +	ret = mem_hotplug_begin(true);
> +	if (ret)
> +		return ret;
>   	/*
>   	 * This doesn't need a lock to do pfn_to_page().
>   	 * The section can't be removed here because of the
> @@ -1146,7 +1156,7 @@ int try_online_node(int nid)
>   	if (node_online(nid))
>   		return 0;
>   
> -	mem_hotplug_begin();
> +	mem_hotplug_begin(false);
>   	pgdat = hotadd_new_pgdat(nid, 0);
>   	if (!pgdat) {
>   		pr_err("Cannot online node %d due to NULL pgdat\n", nid);
> @@ -1236,7 +1246,7 @@ int __ref add_memory(int nid, u64 start, u64 size)
>   		new_pgdat = !p;
>   	}
>   
> -	mem_hotplug_begin();
> +	mem_hotplug_begin(false);
>   
>   	new_node = !node_online(nid);
>   	if (new_node) {
> @@ -1684,7 +1694,7 @@ static int __ref __offline_pages(unsigned long start_pfn,
>   	if (!test_pages_in_a_zone(start_pfn, end_pfn))
>   		return -EINVAL;
>   
> -	mem_hotplug_begin();
> +	mem_hotplug_begin(false);
>   
>   	zone = page_zone(pfn_to_page(start_pfn));
>   	node = zone_to_nid(zone);
> @@ -2002,7 +2012,7 @@ void __ref remove_memory(int nid, u64 start, u64 size)
>   
>   	BUG_ON(check_hotplug_memory_range(start, size));
>   
> -	mem_hotplug_begin();
> +	mem_hotplug_begin(false);
>   
>   	/*
>   	 * All memory blocks must be offlined before removing memory.  Check
> 


--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

RE: [PATCH 1/1] mm: Fix a deadlock in the hotplug code

[KY Srinivasan]

> -----Original Message-----
> From: Yasuaki Ishimatsu [mailto:isimatu.yasuaki@jp.fujitsu.com]
> Sent: Thursday, December 4, 2014 10:22 PM
> To: KY Srinivasan
> Cc: linux-kernel@vger.kernel.org; olaf@aepfle.de; apw@canonical.com;
> linux-mm@kvack.org
> Subject: Re: [PATCH 1/1] mm: Fix a deadlock in the hotplug code
> 
> (2014/12/03 5:46), K. Y. Srinivasan wrote:
> > Andy Whitcroft <apw@canonical.com> initially saw this deadlock. We
> > have seen this as well. Here is the original description of the
> > problem (and a potential solution) from Andy:
> >
> > https://lkml.org/lkml/2014/3/14/451
> >
> > Here is an excerpt from that mail:
> >
> > "We are seeing machines lockup with what appears to be an ABBA
> > deadlock in the memory hotplug system.  These are from the 3.13.6 based
> Ubuntu kernels.
> > The hv_balloon driver is adding memory using add_memory() which takes
> > the hotplug lock, and then emits a udev event, and then attempts to
> > lock the sysfs device.  In response to the udev event udev opens the
> > sysfs device and locks it, then attempts to grab the hotplug lock to online
> the memory.
> > This seems to be inverted nesting in the two cases, leading to the hangs
> below:
> >
> > [  240.608612] INFO: task kworker/0:2:861 blocked for more than 120
> seconds.
> > [  240.608705] INFO: task systemd-udevd:1906 blocked for more than 120
> seconds.
> >
> > I note that the device hotplug locking allows complete retries (via
> > ERESTARTSYS) and if we could detect this at the online stage it could
> > be used to get us out.  But before I go down this road I wanted to
> > make sure I am reading this right.  Or indeed if the hv_balloon driver
> > is just doing this wrong."
> >
> > This patch is based on Andy's analysis and suggestion.
> 
> How about use lock_device_hotplug() before calling add_memory() in
> hv_mem_hot_add()?
> Commit 0f1cfe9d0d06 (mm/hotplug: remove stop_machine() from
> try_offline_node()) said:
> 
>   ---
>     lock_device_hotplug() serializes hotplug & online/offline operations.  The
>     lock is held in common sysfs online/offline interfaces and ACPI hotplug
>     code paths.
> 
>     And here are the code paths:
> 
>     - CPU & Mem online/offline via sysfs online
>         store_online()->lock_device_hotplug()
> 
>     - Mem online via sysfs state:
>         store_mem_state()->lock_device_hotplug()
> 
>     - ACPI CPU & Mem hot-add:
>         acpi_scan_bus_device_check()->lock_device_hotplug()
> 
>     - ACPI CPU & Mem hot-delete:
>         acpi_scan_hot_remove()->lock_device_hotplug()
>   ---
> 
> CPU & Memory online/offline/hotplug are serialized by
> lock_device_hotplug().
> So using lock_device_hotplug() solves the ABBA issue.

Thank you!  I will make the necessary adjustments including exporting the relevant
Functions lock/unlock the device_hotplug lock.

Regards,

K. Y
> 
> Thanks,
> Yasuaki Ishimatsu
> 
> >
> > Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
> > ---
> >   mm/memory_hotplug.c |   24 +++++++++++++++++-------
> >   1 files changed, 17 insertions(+), 7 deletions(-)
> >
> > diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index
> > 9fab107..e195269 100644
> > --- a/mm/memory_hotplug.c
> > +++ b/mm/memory_hotplug.c
> > @@ -104,19 +104,27 @@ void put_online_mems(void)
> >
> >   }
> >
> > -static void mem_hotplug_begin(void)
> > +static int mem_hotplug_begin(bool trylock)
> >   {
> >   	mem_hotplug.active_writer = current;
> >
> >   	memhp_lock_acquire();
> >   	for (;;) {
> > -		mutex_lock(&mem_hotplug.lock);
> > +		if (trylock) {
> > +			if (!mutex_trylock(&mem_hotplug.lock)) {
> > +				mem_hotplug.active_writer = NULL;
> > +				return -ERESTARTSYS;
> > +			}
> > +		} else {
> > +			mutex_lock(&mem_hotplug.lock);
> > +		}
> >   		if (likely(!mem_hotplug.refcount))
> >   			break;
> >   		__set_current_state(TASK_UNINTERRUPTIBLE);
> >   		mutex_unlock(&mem_hotplug.lock);
> >   		schedule();
> >   	}
> > +	return 0;
> >   }
> >
> >   static void mem_hotplug_done(void)
> > @@ -969,7 +977,9 @@ int __ref online_pages(unsigned long pfn, unsigned
> long nr_pages, int online_typ
> >   	int ret;
> >   	struct memory_notify arg;
> >
> > -	mem_hotplug_begin();
> > +	ret = mem_hotplug_begin(true);
> > +	if (ret)
> > +		return ret;
> >   	/*
> >   	 * This doesn't need a lock to do pfn_to_page().
> >   	 * The section can't be removed here because of the @@ -1146,7
> > +1156,7 @@ int try_online_node(int nid)
> >   	if (node_online(nid))
> >   		return 0;
> >
> > -	mem_hotplug_begin();
> > +	mem_hotplug_begin(false);
> >   	pgdat = hotadd_new_pgdat(nid, 0);
> >   	if (!pgdat) {
> >   		pr_err("Cannot online node %d due to NULL pgdat\n", nid);
> @@
> > -1236,7 +1246,7 @@ int __ref add_memory(int nid, u64 start, u64 size)
> >   		new_pgdat = !p;
> >   	}
> >
> > -	mem_hotplug_begin();
> > +	mem_hotplug_begin(false);
> >
> >   	new_node = !node_online(nid);
> >   	if (new_node) {
> > @@ -1684,7 +1694,7 @@ static int __ref __offline_pages(unsigned long
> start_pfn,
> >   	if (!test_pages_in_a_zone(start_pfn, end_pfn))
> >   		return -EINVAL;
> >
> > -	mem_hotplug_begin();
> > +	mem_hotplug_begin(false);
> >
> >   	zone = page_zone(pfn_to_page(start_pfn));
> >   	node = zone_to_nid(zone);
> > @@ -2002,7 +2012,7 @@ void __ref remove_memory(int nid, u64 start,
> u64
> > size)
> >
> >   	BUG_ON(check_hotplug_memory_range(start, size));
> >
> > -	mem_hotplug_begin();
> > +	mem_hotplug_begin(false);
> >
> >   	/*
> >   	 * All memory blocks must be offlined before removing memory.
> > Check
> >
> 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>