From: Joonsoo Kim <iamjoonsoo.kim@lge.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
Rik van Riel <riel@redhat.com>,
Peter Zijlstra <peterz@infradead.org>,
Mel Gorman <mgorman@suse.de>,
Johannes Weiner <hannes@cmpxchg.org>,
Minchan Kim <minchan@kernel.org>,
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>,
Zhang Yanfei <zhangyanfei@cn.fujitsu.com>,
"Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>,
Tang Chen <tangchen@cn.fujitsu.com>,
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Wen Congyang <wency@cn.fujitsu.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Michal Nazarewicz <mina86@mina86.com>,
Laura Abbott <lauraa@codeaurora.org>,
Heesub Shin <heesub.shin@samsung.com>,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
Ritesh Harjani <ritesh.list@gmail.com>,
t.stanislaws@samsung.com, Gioh Kim <gioh.kim@lge.com>,
Vlastimil Babka <vbabka@suse.cz>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Joonsoo Kim <iamjoonsoo.kim@lge.com>
Subject: [RFC PATCH v3 2/4] mm/page_alloc: add freepage on isolate pageblock to correct buddy list
Date: Tue, 26 Aug 2014 17:08:16 +0900 [thread overview]
Message-ID: <1409040498-10148-3-git-send-email-iamjoonsoo.kim@lge.com> (raw)
In-Reply-To: <1409040498-10148-1-git-send-email-iamjoonsoo.kim@lge.com>
In free_pcppages_bulk(), we use cached migratetype of freepage
to determine type of buddy list where freepage will be added.
This information is stored when freepage is added to pcp list, so
if isolation of pageblock of this freepage begins after storing,
this cached information could be stale. In other words, it has
original migratetype rather than MIGRATE_ISOLATE.
There are two problems caused by this stale information. One is that
we can't keep these freepages from being allocated. Although this
pageblock is isolated, freepage will be added to normal buddy list
so that it could be allocated without any restriction. And the other
problem is incorrect freepage accounting. Freepages on isolate pageblock
should not be counted for number of freepage.
Following is the code snippet in free_pcppages_bulk().
/* MIGRATE_MOVABLE list may include MIGRATE_RESERVEs */
__free_one_page(page, page_to_pfn(page), zone, 0, mt);
trace_mm_page_pcpu_drain(page, 0, mt);
if (likely(!is_migrate_isolate_page(page))) {
__mod_zone_page_state(zone, NR_FREE_PAGES, 1);
if (is_migrate_cma(mt))
__mod_zone_page_state(zone, NR_FREE_CMA_PAGES, 1);
}
As you can see above snippet, current code already handle second problem,
incorrect freepage accounting, by re-fetching pageblock migratetype
through is_migrate_isolate_page(page). But, because this re-fetched
information isn't used for __free_one_page(), first problem would not be
solved. This patch try to solve this situation to re-fetch pageblock
migratetype before __free_one_page() and to use it for __free_one_page().
In addition to move up position of this re-fetch, this patch use
optimization technique, re-fetching migratetype only if there is
isolate pageblock. Pageblock isolation is rare event, so we can
avoid re-fetching in common case with this optimization.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
---
mm/page_alloc.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 51e0d13..6c952b6 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -716,14 +716,17 @@ static void free_pcppages_bulk(struct zone *zone, int count,
/* must delete as __free_one_page list manipulates */
list_del(&page->lru);
mt = get_freepage_migratetype(page);
+ if (unlikely(has_isolate_pageblock(zone))) {
+ mt = get_pageblock_migratetype(page);
+ if (is_migrate_isolate(mt))
+ goto skip_counting;
+ }
+ __mod_zone_freepage_state(zone, 1, mt);
+
+skip_counting:
/* MIGRATE_MOVABLE list may include MIGRATE_RESERVEs */
__free_one_page(page, page_to_pfn(page), zone, 0, mt);
trace_mm_page_pcpu_drain(page, 0, mt);
- if (likely(!is_migrate_isolate_page(page))) {
- __mod_zone_page_state(zone, NR_FREE_PAGES, 1);
- if (is_migrate_cma(mt))
- __mod_zone_page_state(zone, NR_FREE_CMA_PAGES, 1);
- }
} while (--to_free && --batch_free && !list_empty(list));
}
spin_unlock(&zone->lock);
--
1.7.9.5
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2014-08-26 8:08 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-26 8:08 [RFC PATCH v3 0/4] fix freepage count problems in memory isolation Joonsoo Kim
2014-08-26 8:08 ` [RFC PATCH v3 1/4] mm/page_alloc: fix incorrect isolation behavior by rechecking migratetype Joonsoo Kim
2014-08-29 17:46 ` Naoya Horiguchi
2014-09-01 0:14 ` Joonsoo Kim
2014-09-08 8:31 ` Vlastimil Babka
2014-09-15 2:31 ` Joonsoo Kim
2014-09-24 13:30 ` Vlastimil Babka
2014-09-25 6:13 ` Joonsoo Kim
2014-08-26 8:08 ` Joonsoo Kim [this message]
2014-08-26 8:08 ` [RFC PATCH v3 3/4] mm/page_alloc: move migratetype recheck logic to __free_one_page() Joonsoo Kim
2014-08-26 8:08 ` [RFC PATCH v3 4/4] mm/page_alloc: restrict max order of merging on isolated pageblock Joonsoo Kim
2014-08-29 16:52 ` Naoya Horiguchi
2014-09-01 0:15 ` Joonsoo Kim
2014-09-15 5:09 ` [RFC PATCH v3 0/4] fix freepage count problems in memory isolation Minchan Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409040498-10148-3-git-send-email-iamjoonsoo.kim@lge.com \
--to=iamjoonsoo.kim@lge.com \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=b.zolnierkie@samsung.com \
--cc=gioh.kim@lge.com \
--cc=hannes@cmpxchg.org \
--cc=heesub.shin@samsung.com \
--cc=isimatu.yasuaki@jp.fujitsu.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=lauraa@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=m.szyprowski@samsung.com \
--cc=mgorman@suse.de \
--cc=mina86@mina86.com \
--cc=minchan@kernel.org \
--cc=n-horiguchi@ah.jp.nec.com \
--cc=peterz@infradead.org \
--cc=riel@redhat.com \
--cc=ritesh.list@gmail.com \
--cc=srivatsa.bhat@linux.vnet.ibm.com \
--cc=t.stanislaws@samsung.com \
--cc=tangchen@cn.fujitsu.com \
--cc=vbabka@suse.cz \
--cc=wency@cn.fujitsu.com \
--cc=zhangyanfei@cn.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox