From: Liu Ping Fan <qemulist@gmail.com>
To: linux-mm@kvack.org
Cc: Peter Zijlstra <peterz@infradead.org>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>
Subject: [PATCH] mm: numa: bugfix for LAST_CPUPID_NOT_IN_PAGE_FLAGS
Date: Wed, 5 Feb 2014 09:25:46 +0800 [thread overview]
Message-ID: <1391563546-26052-1-git-send-email-pingfank@linux.vnet.ibm.com> (raw)
When doing some numa tests on powerpc, I triggered an oops bug. I find
it is caused by using page->_last_cpupid. It should be initialized as
"-1 & LAST_CPUPID_MASK", but not "-1". Otherwise, in task_numa_fault(),
we will miss the checking (last_cpupid == (-1 & LAST_CPUPID_MASK)).
And finally cause an oops bug in task_numa_group(), since the online cpu is
less than possible cpu.
Call trace:
[ 55.978091] SMP NR_CPUS=64 NUMA PowerNV
[ 55.978118] Modules linked in:
[ 55.978145] CPU: 24 PID: 804 Comm: systemd-udevd Not tainted
3.13.0-rc1+ #32
[ 55.978183] task: c000001e2746aa80 ti: c000001e32c50000 task.ti:
c000001e32c50000
[ 55.978219] NIP: c0000000000f5ad0 LR: c0000000000f5ac8 CTR:
c000000000913cf0
[ 55.978256] REGS: c000001e32c53510 TRAP: 0300 Not tainted
(3.13.0-rc1+)
[ 55.978286] MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR:
28024424 XER: 20000000
[ 55.978380] CFAR: c000000000009324 DAR: 7265717569726857 DSISR:
40000000 SOFTE: 1
GPR00: c0000000000f5ac8 c000001e32c53790 c000000001f34338
0000000000000021
GPR04: 0000000000000000 0000000000000031 c000000001f74338
0000ffffffffffff
GPR08: 0000000000000001 7265717569726573 0000000000000000
0000000000000000
GPR12: 0000000028024422 c00000000ffdd800 00000000296b2e64
0000000000000020
GPR16: 0000000000000002 0000000000000003 c000001e2f8e4658
c000001e25c1c1d8
GPR20: c000001e2f8e4000 c000000001f7a858 0000000000000658
0000000040000392
GPR24: 00000000000000a8 c000001e33c1a400 00000000000001d8
c000001e25c1c000
GPR28: c000001e33c37ff0 0007837840000392 000000000000003f
c000001e32c53790
[ 55.978903] NIP [c0000000000f5ad0] .task_numa_fault+0x1470/0x2370
[ 55.978934] LR [c0000000000f5ac8] .task_numa_fault+0x1468/0x2370
[ 55.978964] Call Trace:
[ 55.978978] [c000001e32c53790] [c0000000000f5ac8]
.task_numa_fault+0x1468/0x2370 (unreliable)
[ 55.979036] [c000001e32c539e0] [c00000000020a820]
.do_numa_page+0x480/0x4a0
[ 55.979072] [c000001e32c53b10] [c00000000020bfec]
.handle_mm_fault+0x4ec/0xc90
[ 55.979123] [c000001e32c53c00] [c000000000e88c98]
.do_page_fault+0x3a8/0x890
[ 55.979161] [c000001e32c53e30] [c000000000009568]
handle_page_fault+0x10/0x30
[ 55.979197] Instruction dump:
[ 55.979216] 3c82fefb 3884b138 48d9cff1 60000000 48000574 3c62fefb
3863af78 3c82fefb
[ 55.979277] 3884b138 48d9cfd5 60000000 e93f0100 <812902e4> 7d2907b4
5529063e 7d2a07b4
[ 55.979354] ---[ end trace 15f2510da5ae07cf ]---
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
---
I do the test on benh's git tree
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git next commit 37e4a67be7beff74df2cdddfcb08153282c0f8a1
(With patch "sched: Avoid NULL dereference on sd_busy" by PerterZ)
---
include/linux/mm.h | 2 +-
include/linux/page-flags-layout.h | 12 ++++--------
2 files changed, 5 insertions(+), 9 deletions(-)
diff --git a/include/linux/mm.h b/include/linux/mm.h
index a7b4e31..ddc66df4 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -727,7 +727,7 @@ static inline int page_cpupid_last(struct page *page)
}
static inline void page_cpupid_reset_last(struct page *page)
{
- page->_last_cpupid = -1;
+ page->_last_cpupid = -1 & LAST_CPUPID_MASK;
}
#else
static inline int page_cpupid_last(struct page *page)
diff --git a/include/linux/page-flags-layout.h b/include/linux/page-flags-layout.h
index da52366..3cbaa20 100644
--- a/include/linux/page-flags-layout.h
+++ b/include/linux/page-flags-layout.h
@@ -69,15 +69,15 @@
#define LAST__CPU_MASK ((1 << LAST__CPU_SHIFT)-1)
#define LAST_CPUPID_SHIFT (LAST__PID_SHIFT+LAST__CPU_SHIFT)
+
+#if SECTIONS_WIDTH+ZONES_WIDTH+NODES_SHIFT+LAST_CPUPID_SHIFT > BITS_PER_LONG - NR_PAGEFLAGS
+#define LAST_CPUPID_NOT_IN_PAGE_FLAGS
+#endif
#else
#define LAST_CPUPID_SHIFT 0
#endif
-#if SECTIONS_WIDTH+ZONES_WIDTH+NODES_SHIFT+LAST_CPUPID_SHIFT <= BITS_PER_LONG - NR_PAGEFLAGS
#define LAST_CPUPID_WIDTH LAST_CPUPID_SHIFT
-#else
-#define LAST_CPUPID_WIDTH 0
-#endif
/*
* We are going to use the flags for the page to node mapping if its in
@@ -87,8 +87,4 @@
#define NODE_NOT_IN_PAGE_FLAGS
#endif
-#if defined(CONFIG_NUMA_BALANCING) && LAST_CPUPID_WIDTH == 0
-#define LAST_CPUPID_NOT_IN_PAGE_FLAGS
-#endif
-
#endif /* _LINUX_PAGE_FLAGS_LAYOUT */
--
1.8.1.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next reply other threads:[~2014-02-05 1:24 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-05 1:25 Liu Ping Fan [this message]
2014-02-05 8:11 ` Peter Zijlstra
2014-02-06 0:53 ` liu ping fan
2014-02-13 23:20 ` Andrew Morton
2014-02-26 7:52 ` Aneesh Kumar K.V
2014-02-27 23:41 ` Andrew Morton
2014-02-28 2:54 ` liu ping fan
2014-02-28 4:47 ` Aneesh Kumar K.V
2014-02-28 5:28 ` [PATCH V2] " Aneesh Kumar K.V
2014-02-28 6:36 ` [PATCH] " liu ping fan
2014-02-28 9:04 ` Aneesh Kumar K.V
2014-02-26 7:32 ` Aneesh Kumar K.V
2014-02-26 8:21 ` liu ping fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1391563546-26052-1-git-send-email-pingfank@linux.vnet.ibm.com \
--to=qemulist@gmail.com \
--cc=benh@kernel.crashing.org \
--cc=linux-mm@kvack.org \
--cc=paulus@samba.org \
--cc=peterz@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox