linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
To: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
	Matt Mackall <mpm@selenic.com>, Cliff Wickman <cpw@sgi.com>,
	KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>,
	Johannes Weiner <hannes@cmpxchg.org>,
	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>,
	Michal Hocko <mhocko@suse.cz>,
	"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
	Pavel Emelyanov <xemul@parallels.com>,
	Rik van Riel <riel@redhat.com>,
	kirill.shutemov@linux.intel.com, linux-kernel@vger.kernel.org
Subject: [PATCH 08/11] madvise: redefine callback functions for page table walker
Date: Wed, 11 Dec 2013 17:09:04 -0500	[thread overview]
Message-ID: <1386799747-31069-9-git-send-email-n-horiguchi@ah.jp.nec.com> (raw)
In-Reply-To: <1386799747-31069-1-git-send-email-n-horiguchi@ah.jp.nec.com>

swapin_walk_pmd_entry() is defined as pmd_entry(), but it has no code
about pmd handling (except pmd_none_or_trans_huge_or_clear_bad, but the
same check are now done in core page table walk code).
So let's move this function on pte_entry() as swapin_walk_pte_entry().

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
---
 mm/madvise.c | 43 +++++++++++++------------------------------
 1 file changed, 13 insertions(+), 30 deletions(-)

diff --git v3.13-rc3-mmots-2013-12-10-16-38.orig/mm/madvise.c v3.13-rc3-mmots-2013-12-10-16-38/mm/madvise.c
index 539eeb96b323..5e957b984c14 100644
--- v3.13-rc3-mmots-2013-12-10-16-38.orig/mm/madvise.c
+++ v3.13-rc3-mmots-2013-12-10-16-38/mm/madvise.c
@@ -135,38 +135,22 @@ static long madvise_behavior(struct vm_area_struct *vma,
 }
 
 #ifdef CONFIG_SWAP
-static int swapin_walk_pmd_entry(pmd_t *pmd, unsigned long start,
+static int swapin_walk_pte_entry(pte_t *pte, unsigned long start,
 	unsigned long end, struct mm_walk *walk)
 {
-	pte_t *orig_pte;
-	struct vm_area_struct *vma = walk->private;
-	unsigned long index;
+	swp_entry_t entry;
+	struct page *page;
+	struct vm_area_struct *vma = walk->vma;
 
-	if (pmd_none_or_trans_huge_or_clear_bad(pmd))
+	if (pte_present(*pte) || pte_none(*pte) || pte_file(*pte))
 		return 0;
-
-	for (index = start; index != end; index += PAGE_SIZE) {
-		pte_t pte;
-		swp_entry_t entry;
-		struct page *page;
-		spinlock_t *ptl;
-
-		orig_pte = pte_offset_map_lock(vma->vm_mm, pmd, start, &ptl);
-		pte = *(orig_pte + ((index - start) / PAGE_SIZE));
-		pte_unmap_unlock(orig_pte, ptl);
-
-		if (pte_present(pte) || pte_none(pte) || pte_file(pte))
-			continue;
-		entry = pte_to_swp_entry(pte);
-		if (unlikely(non_swap_entry(entry)))
-			continue;
-
-		page = read_swap_cache_async(entry, GFP_HIGHUSER_MOVABLE,
-								vma, index);
-		if (page)
-			page_cache_release(page);
-	}
-
+	entry = pte_to_swp_entry(*pte);
+	if (unlikely(non_swap_entry(entry)))
+		return 0;
+	page = read_swap_cache_async(entry, GFP_HIGHUSER_MOVABLE,
+				     vma, start);
+	if (page)
+		page_cache_release(page);
 	return 0;
 }
 
@@ -175,8 +159,7 @@ static void force_swapin_readahead(struct vm_area_struct *vma,
 {
 	struct mm_walk walk = {
 		.mm = vma->vm_mm,
-		.pmd_entry = swapin_walk_pmd_entry,
-		.private = vma,
+		.pte_entry = swapin_walk_pte_entry,
 	};
 
 	walk_page_range(start, end, &walk);
-- 
1.8.3.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2013-12-11 22:10 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-11 22:08 [PATCH 00/11 v3] update " Naoya Horiguchi
2013-12-11 22:08 ` [PATCH 01/11] pagewalk: update page table walker core Naoya Horiguchi
2014-01-08 23:48   ` Andrew Morton
2014-01-09  4:35     ` Naoya Horiguchi
2013-12-11 22:08 ` [PATCH 02/11] pagewalk: add walk_page_vma() Naoya Horiguchi
2013-12-11 22:08 ` [PATCH 03/11] smaps: redefine callback functions for page table walker Naoya Horiguchi
2013-12-11 22:09 ` [PATCH 04/11] clear_refs: " Naoya Horiguchi
2013-12-11 22:09 ` [PATCH 05/11] pagemap: " Naoya Horiguchi
2013-12-11 22:09 ` [PATCH 06/11] numa_maps: " Naoya Horiguchi
2013-12-11 22:09 ` [PATCH 07/11] memcg: " Naoya Horiguchi
2013-12-11 22:09 ` Naoya Horiguchi [this message]
2013-12-11 22:09 ` [PATCH 09/11] arch/powerpc/mm/subpage-prot.c: use walk_page_vma() instead of walk_page_range() Naoya Horiguchi
2013-12-11 22:09 ` [PATCH 10/11] pagewalk: remove argument hmask from hugetlb_entry() Naoya Horiguchi
2013-12-11 22:09 ` [PATCH 11/11] mempolicy: apply page table walker on queue_pages_range() Naoya Horiguchi
  -- strict thread matches above, loose matches on Subject: below --
2014-02-10 21:44 [PATCH 00/11 v5] update page table walker Naoya Horiguchi
2014-02-10 21:44 ` [PATCH 08/11] madvise: redefine callback functions for " Naoya Horiguchi
2014-03-21  1:47   ` Sasha Levin
2014-01-13 16:54 [PATCH 00/11 v4] update " Naoya Horiguchi
2014-01-13 16:54 ` [PATCH 08/11] madvise: redefine callback functions for " Naoya Horiguchi
2013-10-30 21:44 [PATCH 00/11 v2] update " Naoya Horiguchi
2013-10-30 21:44 ` [PATCH 08/11] madvise: redefine callback functions for " Naoya Horiguchi
2013-10-14 17:36 [PATCH 0/11] update " Naoya Horiguchi
2013-10-14 17:37 ` [PATCH 08/11] madvise: redefine callback functions for " Naoya Horiguchi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1386799747-31069-9-git-send-email-n-horiguchi@ah.jp.nec.com \
    --to=n-horiguchi@ah.jp.nec.com \
    --cc=akpm@linux-foundation.org \
    --cc=aneesh.kumar@linux.vnet.ibm.com \
    --cc=cpw@sgi.com \
    --cc=hannes@cmpxchg.org \
    --cc=kamezawa.hiroyu@jp.fujitsu.com \
    --cc=kirill.shutemov@linux.intel.com \
    --cc=kosaki.motohiro@jp.fujitsu.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@suse.cz \
    --cc=mpm@selenic.com \
    --cc=riel@redhat.com \
    --cc=xemul@parallels.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox