From: Glauber Costa <glommer@parallels.com>
To: cgroups@vger.kernel.org
Cc: linux-mm@kvack.org, Michal Hocko <mhocko@suse.cz>,
kamezawa.hiroyu@jp.fujitsu.com,
Johannes Weiner <hannes@cmpxchg.org>, Tejun Heo <tj@kernel.org>,
Glauber Costa <glommer@parallels.com>
Subject: [PATCH v2 6/7] memcg: replace cgroup_lock with memcg specific memcg_lock
Date: Fri, 11 Jan 2013 13:45:26 +0400 [thread overview]
Message-ID: <1357897527-15479-7-git-send-email-glommer@parallels.com> (raw)
In-Reply-To: <1357897527-15479-1-git-send-email-glommer@parallels.com>
After the preparation work done in earlier patches, the
cgroup_lock can be trivially replaced with a memcg-specific lock. This
is an automatic translation in every site the values involved were
queried.
The sites were values are written, however, used to be naturally called
under cgroup_lock. This is the case for instance of the css_online
callback. For those, we now need to explicitly add the memcg_lock.
With this, all the calls to cgroup_lock outside cgroup core are gone.
Signed-off-by: Glauber Costa <glommer@parallels.com>
---
mm/memcontrol.c | 43 ++++++++++++++++++++++---------------------
1 file changed, 22 insertions(+), 21 deletions(-)
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index c024614..5f3adbc 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -472,6 +472,8 @@ enum res_type {
#define MEM_CGROUP_RECLAIM_SHRINK_BIT 0x1
#define MEM_CGROUP_RECLAIM_SHRINK (1 << MEM_CGROUP_RECLAIM_SHRINK_BIT)
+static DEFINE_MUTEX(memcg_mutex);
+
static void mem_cgroup_get(struct mem_cgroup *memcg);
static void mem_cgroup_put(struct mem_cgroup *memcg);
@@ -2909,7 +2911,7 @@ int memcg_cache_id(struct mem_cgroup *memcg)
* operation, because that is its main call site.
*
* But when we create a new cache, we can call this as well if its parent
- * is kmem-limited. That will have to hold cgroup_lock as well.
+ * is kmem-limited. That will have to hold memcg_mutex as well.
*/
int memcg_update_cache_sizes(struct mem_cgroup *memcg)
{
@@ -2924,7 +2926,7 @@ int memcg_update_cache_sizes(struct mem_cgroup *memcg)
* the beginning of this conditional), is no longer 0. This
* guarantees only one process will set the following boolean
* to true. We don't need test_and_set because we're protected
- * by the cgroup_lock anyway.
+ * by the memcg_mutex anyway.
*/
memcg_kmem_set_activated(memcg);
@@ -3265,9 +3267,9 @@ void kmem_cache_destroy_memcg_children(struct kmem_cache *s)
*
* Still, we don't want anyone else freeing memcg_caches under our
* noses, which can happen if a new memcg comes to life. As usual,
- * we'll take the cgroup_lock to protect ourselves against this.
+ * we'll take the memcg_mutex to protect ourselves against this.
*/
- cgroup_lock();
+ mutex_lock(&memcg_mutex);
for (i = 0; i < memcg_limited_groups_array_size; i++) {
c = s->memcg_params->memcg_caches[i];
if (!c)
@@ -3290,7 +3292,7 @@ void kmem_cache_destroy_memcg_children(struct kmem_cache *s)
cancel_work_sync(&c->memcg_params->destroy);
kmem_cache_destroy(c);
}
- cgroup_unlock();
+ mutex_unlock(&memcg_mutex);
}
struct create_work {
@@ -4816,7 +4818,7 @@ static int mem_cgroup_hierarchy_write(struct cgroup *cont, struct cftype *cft,
if (parent)
parent_memcg = mem_cgroup_from_cont(parent);
- cgroup_lock();
+ mutex_lock(&memcg_mutex);
if (memcg->use_hierarchy == val)
goto out;
@@ -4839,7 +4841,7 @@ static int mem_cgroup_hierarchy_write(struct cgroup *cont, struct cftype *cft,
retval = -EINVAL;
out:
- cgroup_unlock();
+ mutex_unlock(&memcg_mutex);
return retval;
}
@@ -4939,13 +4941,10 @@ static int memcg_update_kmem_limit(struct cgroup *cont, u64 val)
* After it first became limited, changes in the value of the limit are
* of course permitted.
*
- * Taking the cgroup_lock is really offensive, but it is so far the only
- * way to guarantee that no children will appear. There are plenty of
- * other offenders, and they should all go away. Fine grained locking
- * is probably the way to go here. When we are fully hierarchical, we
- * can also get rid of the use_hierarchy check.
+ * We are protected by the memcg_mutex, so no other cgroups can appear
+ * in the mean time.
*/
- cgroup_lock();
+ mutex_lock(&memcg_mutex);
if (!memcg->kmem_account_flags && val != RESOURCE_MAX) {
if (cgroup_task_count(cont) || memcg_has_children(memcg)) {
ret = -EBUSY;
@@ -4970,7 +4969,7 @@ static int memcg_update_kmem_limit(struct cgroup *cont, u64 val)
} else
ret = res_counter_set_limit(&memcg->kmem, val);
out:
- cgroup_unlock();
+ mutex_unlock(&memcg_mutex);
/*
* We are by now familiar with the fact that we can't inc the static
@@ -5027,9 +5026,9 @@ static int memcg_propagate_kmem(struct mem_cgroup *memcg)
mem_cgroup_get(memcg);
static_key_slow_inc(&memcg_kmem_enabled_key);
- cgroup_lock();
+ mutex_lock(&memcg_mutex);
ret = memcg_update_cache_sizes(memcg);
- cgroup_unlock();
+ mutex_unlock(&memcg_mutex);
#endif
out:
return ret;
@@ -5359,17 +5358,17 @@ static int mem_cgroup_swappiness_write(struct cgroup *cgrp, struct cftype *cft,
parent = mem_cgroup_from_cont(cgrp->parent);
- cgroup_lock();
+ mutex_lock(&memcg_mutex);
/* If under hierarchy, only empty-root can set this value */
if ((parent->use_hierarchy) || memcg_has_children(memcg)) {
- cgroup_unlock();
+ mutex_unlock(&memcg_mutex);
return -EINVAL;
}
memcg->swappiness = val;
- cgroup_unlock();
+ mutex_unlock(&memcg_mutex);
return 0;
}
@@ -5695,7 +5694,7 @@ static int mem_cgroup_oom_control_write(struct cgroup *cgrp,
parent = mem_cgroup_from_cont(cgrp->parent);
- cgroup_lock();
+ mutex_lock(&memcg_mutex);
/* oom-kill-disable is a flag for subhierarchy. */
if ((parent->use_hierarchy) ||
(memcg->use_hierarchy && !list_empty(&cgrp->children))) {
@@ -5705,7 +5704,7 @@ static int mem_cgroup_oom_control_write(struct cgroup *cgrp,
memcg->oom_kill_disable = val;
if (!val)
memcg_oom_recover(memcg);
- cgroup_unlock();
+ mutex_unlock(&memcg_mutex);
return 0;
}
@@ -6148,6 +6147,7 @@ mem_cgroup_css_online(struct cgroup *cont)
return 0;
}
+ mutex_lock(&memcg_mutex);
parent = mem_cgroup_from_cont(cont->parent);
memcg->use_hierarchy = parent->use_hierarchy;
@@ -6182,6 +6182,7 @@ mem_cgroup_css_online(struct cgroup *cont)
atomic_set(&memcg->refcnt, 1);
error = memcg_init_kmem(memcg, &mem_cgroup_subsys);
+ mutex_unlock(&memcg_mutex);
if (error) {
/*
* We call put now because our (and parent's) refcnts
--
1.7.11.7
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2013-01-11 9:45 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-11 9:45 [PATCH v2 0/7] replace cgroup_lock with local memcg lock Glauber Costa
2013-01-11 9:45 ` [PATCH v2 1/7] memcg: prevent changes to move_charge_at_immigrate during task attach Glauber Costa
2013-01-18 14:16 ` Michal Hocko
2013-01-11 9:45 ` [PATCH v2 2/7] memcg: split part of memcg creation to css_online Glauber Costa
2013-01-18 15:25 ` Michal Hocko
2013-01-18 19:28 ` Glauber Costa
2013-01-21 7:33 ` Glauber Costa
2013-01-21 8:38 ` Michal Hocko
2013-01-21 8:42 ` Glauber Costa
2013-01-11 9:45 ` [PATCH v2 3/7] memcg: provide online test for memcg Glauber Costa
2013-01-18 15:37 ` Michal Hocko
2013-01-18 15:56 ` Michal Hocko
2013-01-18 19:42 ` Glauber Costa
2013-01-18 19:43 ` Glauber Costa
2013-01-18 19:41 ` Glauber Costa
2013-01-11 9:45 ` [PATCH v2 4/7] memcg: fast hierarchy-aware child test Glauber Costa
2013-01-18 16:06 ` Michal Hocko
2013-01-21 7:58 ` Glauber Costa
2013-01-21 8:34 ` Michal Hocko
2013-01-21 8:41 ` Glauber Costa
2013-01-21 9:15 ` Michal Hocko
2013-01-21 9:19 ` Glauber Costa
2013-01-11 9:45 ` [PATCH v2 5/7] May god have mercy on my soul Glauber Costa
2013-01-18 16:07 ` Michal Hocko
2013-01-11 9:45 ` Glauber Costa [this message]
2013-01-18 16:21 ` [PATCH v2 6/7] memcg: replace cgroup_lock with memcg specific memcg_lock Michal Hocko
2013-01-11 9:45 ` [PATCH v2 7/7] memcg: increment static branch right after limit set Glauber Costa
2013-01-18 16:23 ` Michal Hocko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1357897527-15479-7-git-send-email-glommer@parallels.com \
--to=glommer@parallels.com \
--cc=cgroups@vger.kernel.org \
--cc=hannes@cmpxchg.org \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.cz \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox