From: Lai Jiangshan <laijs@cn.fujitsu.com>
To: Mel Gorman <mgorman@suse.de>,
David Rientjes <rientjes@google.com>,
LKML <linux-kernel@vger.kernel.org>,
x86 maintainers <x86@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>,
Rusty Russell <rusty@rustcorp.com.au>,
Yinghai Lu <yinghai@kernel.org>,
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>,
Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com>,
Andrew Morton <akpm@linux-foundation.org>,
Lai Jiangshan <laijs@cn.fujitsu.com>,
Rob Landley <rob@landley.net>, Jianguo Wu <wujianguo@huawei.com>,
Kay Sievers <kay.sievers@vrfy.org>,
Wen Congyang <wency@cn.fujitsu.com>,
linux-doc@vger.kernel.org, linux-mm@kvack.org
Subject: [V5 PATCH 18/26] hotplug: update nodemasks management
Date: Mon, 29 Oct 2012 23:21:08 +0800 [thread overview]
Message-ID: <1351524078-20363-17-git-send-email-laijs@cn.fujitsu.com> (raw)
In-Reply-To: <1351523301-20048-1-git-send-email-laijs@cn.fujitsu.com>
update nodemasks management for N_MEMORY
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
---
Documentation/memory-hotplug.txt | 5 ++-
include/linux/memory.h | 1 +
mm/memory_hotplug.c | 87 +++++++++++++++++++++++++++++++-------
3 files changed, 77 insertions(+), 16 deletions(-)
diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt
index c6f993d..8e5eacb 100644
--- a/Documentation/memory-hotplug.txt
+++ b/Documentation/memory-hotplug.txt
@@ -390,6 +390,7 @@ struct memory_notify {
unsigned long start_pfn;
unsigned long nr_pages;
int status_change_nid_normal;
+ int status_change_nid_high;
int status_change_nid;
}
@@ -397,7 +398,9 @@ start_pfn is start_pfn of online/offline memory.
nr_pages is # of pages of online/offline memory.
status_change_nid_normal is set node id when N_NORMAL_MEMORY of nodemask
is (will be) set/clear, if this is -1, then nodemask status is not changed.
-status_change_nid is set node id when N_HIGH_MEMORY of nodemask is (will be)
+status_change_nid_high is set node id when N_HIGH_MEMORY of nodemask
+is (will be) set/clear, if this is -1, then nodemask status is not changed.
+status_change_nid is set node id when N_MEMORY of nodemask is (will be)
set/clear. It means a new(memoryless) node gets new memory by online and a
node loses all memory. If this is -1, then nodemask status is not changed.
If status_changed_nid* >= 0, callback should create/discard structures for the
diff --git a/include/linux/memory.h b/include/linux/memory.h
index a09216d..45e93b4 100644
--- a/include/linux/memory.h
+++ b/include/linux/memory.h
@@ -54,6 +54,7 @@ struct memory_notify {
unsigned long start_pfn;
unsigned long nr_pages;
int status_change_nid_normal;
+ int status_change_nid_high;
int status_change_nid;
};
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 9af9641..a55b547 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -603,13 +603,15 @@ static void node_states_check_changes_online(unsigned long nr_pages,
enum zone_type zone_last = ZONE_NORMAL;
/*
- * If we have HIGHMEM, node_states[N_NORMAL_MEMORY] contains nodes
- * which have 0...ZONE_NORMAL, set zone_last to ZONE_NORMAL.
+ * If we have HIGHMEM or movable node, node_states[N_NORMAL_MEMORY]
+ * contains nodes which have zones of 0...ZONE_NORMAL,
+ * set zone_last to ZONE_NORMAL.
*
- * If we don't have HIGHMEM, node_states[N_NORMAL_MEMORY] contains nodes
- * which have 0...ZONE_MOVABLE, set zone_last to ZONE_MOVABLE.
+ * If we don't have HIGHMEM nor movable node,
+ * node_states[N_NORMAL_MEMORY] contains nodes which have zones of
+ * 0...ZONE_MOVABLE, set zone_last to ZONE_MOVABLE.
*/
- if (N_HIGH_MEMORY == N_NORMAL_MEMORY)
+ if (N_MEMORY == N_NORMAL_MEMORY)
zone_last = ZONE_MOVABLE;
/*
@@ -623,12 +625,34 @@ static void node_states_check_changes_online(unsigned long nr_pages,
else
arg->status_change_nid_normal = -1;
+#ifdef CONFIG_HIGHMEM
+ /*
+ * If we have movable node, node_states[N_HIGH_MEMORY]
+ * contains nodes which have zones of 0...ZONE_HIGH,
+ * set zone_last to ZONE_HIGH.
+ *
+ * If we don't have movable node, node_states[N_NORMAL_MEMORY]
+ * contains nodes which have zones of 0...ZONE_MOVABLE,
+ * set zone_last to ZONE_MOVABLE.
+ */
+ zone_last = ZONE_HIGH;
+ if (N_MEMORY == N_HIGH_MEMORY)
+ zone_last = ZONE_MOVABLE;
+
+ if (zone_idx(zone) <= zone_last && !node_state(nid, N_HIGH_MEMORY))
+ arg->status_change_nid_high = nid;
+ else
+ arg->status_change_nid_high = -1;
+#else
+ arg->status_change_nid_high = arg->status_change_nid_normal;
+#endif
+
/*
* if the node don't have memory befor online, we will need to
- * set the node to node_states[N_HIGH_MEMORY] after the memory
+ * set the node to node_states[N_MEMORY] after the memory
* is online.
*/
- if (!node_state(nid, N_HIGH_MEMORY))
+ if (!node_state(nid, N_MEMORY))
arg->status_change_nid = nid;
else
arg->status_change_nid = -1;
@@ -639,7 +663,10 @@ static void node_states_set_node(int node, struct memory_notify *arg)
if (arg->status_change_nid_normal >= 0)
node_set_state(node, N_NORMAL_MEMORY);
- node_set_state(node, N_HIGH_MEMORY);
+ if (arg->status_change_nid_high >= 0)
+ node_set_state(node, N_HIGH_MEMORY);
+
+ node_set_state(node, N_MEMORY);
}
@@ -1103,13 +1130,15 @@ static void node_states_check_changes_offline(unsigned long nr_pages,
enum zone_type zt, zone_last = ZONE_NORMAL;
/*
- * If we have HIGHMEM, node_states[N_NORMAL_MEMORY] contains nodes
- * which have 0...ZONE_NORMAL, set zone_last to ZONE_NORMAL.
+ * If we have HIGHMEM or movable node, node_states[N_NORMAL_MEMORY]
+ * contains nodes which have zones of 0...ZONE_NORMAL,
+ * set zone_last to ZONE_NORMAL.
*
- * If we don't have HIGHMEM, node_states[N_NORMAL_MEMORY] contains nodes
- * which have 0...ZONE_MOVABLE, set zone_last to ZONE_MOVABLE.
+ * If we don't have HIGHMEM nor movable node,
+ * node_states[N_NORMAL_MEMORY] contains nodes which have zones of
+ * 0...ZONE_MOVABLE, set zone_last to ZONE_MOVABLE.
*/
- if (N_HIGH_MEMORY == N_NORMAL_MEMORY)
+ if (N_MEMORY == N_NORMAL_MEMORY)
zone_last = ZONE_MOVABLE;
/*
@@ -1126,6 +1155,30 @@ static void node_states_check_changes_offline(unsigned long nr_pages,
else
arg->status_change_nid_normal = -1;
+#ifdef CONIG_HIGHMEM
+ /*
+ * If we have movable node, node_states[N_HIGH_MEMORY]
+ * contains nodes which have zones of 0...ZONE_HIGH,
+ * set zone_last to ZONE_HIGH.
+ *
+ * If we don't have movable node, node_states[N_NORMAL_MEMORY]
+ * contains nodes which have zones of 0...ZONE_MOVABLE,
+ * set zone_last to ZONE_MOVABLE.
+ */
+ zone_last = ZONE_HIGH;
+ if (N_MEMORY == N_HIGH_MEMORY)
+ zone_last = ZONE_MOVABLE;
+
+ for (; zt <= zone_last; zt++)
+ present_pages += pgdat->node_zones[zt].present_pages;
+ if (zone_idx(zone) <= zone_last && nr_pages >= present_pages)
+ arg->status_change_nid_high = zone_to_nid(zone);
+ else
+ arg->status_change_nid_high = -1;
+#else
+ arg->status_change_nid_high = arg->status_change_nid_normal;
+#endif
+
/*
* node_states[N_HIGH_MEMORY] contains nodes which have 0...ZONE_MOVABLE
*/
@@ -1150,9 +1203,13 @@ static void node_states_clear_node(int node, struct memory_notify *arg)
if (arg->status_change_nid_normal >= 0)
node_clear_state(node, N_NORMAL_MEMORY);
- if ((N_HIGH_MEMORY != N_NORMAL_MEMORY) &&
- (arg->status_change_nid >= 0))
+ if ((N_MEMORY != N_NORMAL_MEMORY) &&
+ (arg->status_change_nid_high >= 0))
node_clear_state(node, N_HIGH_MEMORY);
+
+ if ((N_MEMORY != N_HIGH_MEMORY) &&
+ (arg->status_change_nid >= 0))
+ node_clear_state(node, N_MEMORY);
}
static int __ref __offline_pages(unsigned long start_pfn,
--
1.7.4.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2012-10-29 15:48 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1351523301-20048-1-git-send-email-laijs@cn.fujitsu.com>
2012-10-29 15:20 ` [V5 PATCH 02/26] memory_hotplug: handle empty zone when online_movable/online_kernel Lai Jiangshan
2012-10-29 15:20 ` [V5 PATCH 03/26] memory_hotplug: ensure every online node has NORMAL memory Lai Jiangshan
2012-10-29 15:20 ` [V5 PATCH 08/26] memcontrol: use N_MEMORY instead N_HIGH_MEMORY Lai Jiangshan
2012-10-29 16:22 ` Michal Hocko
2012-10-29 20:40 ` David Rientjes
2012-10-29 20:58 ` Michal Hocko
2012-10-29 21:08 ` David Rientjes
2012-10-29 21:34 ` Michal Hocko
2012-10-31 13:18 ` Michal Hocko
2012-10-29 15:20 ` [V5 PATCH 09/26] oom: " Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 10/26] mm,migrate: " Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 11/26] mempolicy: " Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 12/26] hugetlb: " Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 13/26] vmstat: " Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 16/26] vmscan: " Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 17/26] page_alloc: use N_MEMORY instead N_HIGH_MEMORY change the node_states initialization Lai Jiangshan
2012-10-29 15:21 ` Lai Jiangshan [this message]
2012-10-29 15:21 ` [V5 PATCH 19/26] numa: add CONFIG_MOVABLE_NODE for movable-dedicated node Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 20/26] memory_hotplug: allow online/offline memory to result movable node Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 21/26] page_alloc: add kernelcore_max_addr Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 24/26] memblock: limit memory address from memblock Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 25/26] memblock: compare current_limit with end variable at memblock_find_in_range_node() Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 26/26] mempolicy: fix is_valid_nodemask() Lai Jiangshan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351524078-20363-17-git-send-email-laijs@cn.fujitsu.com \
--to=laijs@cn.fujitsu.com \
--cc=akpm@linux-foundation.org \
--cc=isimatu.yasuaki@jp.fujitsu.com \
--cc=jiang.liu@huawei.com \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=kay.sievers@vrfy.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=rientjes@google.com \
--cc=rob@landley.net \
--cc=rusty@rustcorp.com.au \
--cc=wency@cn.fujitsu.com \
--cc=wujianguo@huawei.com \
--cc=x86@kernel.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox