From: Lai Jiangshan <laijs@cn.fujitsu.com>
To: Mel Gorman <mgorman@suse.de>,
David Rientjes <rientjes@google.com>,
LKML <linux-kernel@vger.kernel.org>,
x86 maintainers <x86@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>,
Rusty Russell <rusty@rustcorp.com.au>,
Yinghai Lu <yinghai@kernel.org>,
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>,
Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com>,
Andrew Morton <akpm@linux-foundation.org>,
Lai Jiangshan <laijs@cn.fujitsu.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
Tejun Heo <tj@kernel.org>, Pekka Enberg <penberg@kernel.org>,
Minchan Kim <minchan@kernel.org>, Michal Hocko <mhocko@suse.cz>,
linux-mm@kvack.org
Subject: [V5 PATCH 17/26] page_alloc: use N_MEMORY instead N_HIGH_MEMORY change the node_states initialization
Date: Mon, 29 Oct 2012 23:21:07 +0800 [thread overview]
Message-ID: <1351524078-20363-16-git-send-email-laijs@cn.fujitsu.com> (raw)
In-Reply-To: <1351523301-20048-1-git-send-email-laijs@cn.fujitsu.com>
N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.
The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.
Since we introduced N_MEMORY, we update the initialization of node_states.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
---
arch/x86/mm/init_64.c | 4 +++-
mm/page_alloc.c | 40 ++++++++++++++++++++++------------------
2 files changed, 25 insertions(+), 19 deletions(-)
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 3baff25..2ead3c8 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -630,7 +630,9 @@ void __init paging_init(void)
* numa support is not compiled in, and later node_set_state
* will not set it back.
*/
- node_clear_state(0, N_NORMAL_MEMORY);
+ node_clear_state(0, N_MEMORY);
+ if (N_MEMORY != N_NORMAL_MEMORY)
+ node_clear_state(0, N_NORMAL_MEMORY);
zone_sizes_init();
}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index b1ef9b0..b70c929 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1692,7 +1692,7 @@ bool zone_watermark_ok_safe(struct zone *z, int order, unsigned long mark,
*
* If the zonelist cache is present in the passed in zonelist, then
* returns a pointer to the allowed node mask (either the current
- * tasks mems_allowed, or node_states[N_HIGH_MEMORY].)
+ * tasks mems_allowed, or node_states[N_MEMORY].)
*
* If the zonelist cache is not available for this zonelist, does
* nothing and returns NULL.
@@ -1721,7 +1721,7 @@ static nodemask_t *zlc_setup(struct zonelist *zonelist, int alloc_flags)
allowednodes = !in_interrupt() && (alloc_flags & ALLOC_CPUSET) ?
&cpuset_current_mems_allowed :
- &node_states[N_HIGH_MEMORY];
+ &node_states[N_MEMORY];
return allowednodes;
}
@@ -3194,7 +3194,7 @@ static int find_next_best_node(int node, nodemask_t *used_node_mask)
return node;
}
- for_each_node_state(n, N_HIGH_MEMORY) {
+ for_each_node_state(n, N_MEMORY) {
/* Don't want a node to appear more than once */
if (node_isset(n, *used_node_mask))
@@ -3336,7 +3336,7 @@ static int default_zonelist_order(void)
* local memory, NODE_ORDER may be suitable.
*/
average_size = total_size /
- (nodes_weight(node_states[N_HIGH_MEMORY]) + 1);
+ (nodes_weight(node_states[N_MEMORY]) + 1);
for_each_online_node(nid) {
low_kmem_size = 0;
total_size = 0;
@@ -4669,7 +4669,7 @@ unsigned long __init find_min_pfn_with_active_regions(void)
/*
* early_calculate_totalpages()
* Sum pages in active regions for movable zone.
- * Populate N_HIGH_MEMORY for calculating usable_nodes.
+ * Populate N_MEMORY for calculating usable_nodes.
*/
static unsigned long __init early_calculate_totalpages(void)
{
@@ -4682,7 +4682,7 @@ static unsigned long __init early_calculate_totalpages(void)
totalpages += pages;
if (pages)
- node_set_state(nid, N_HIGH_MEMORY);
+ node_set_state(nid, N_MEMORY);
}
return totalpages;
}
@@ -4699,9 +4699,9 @@ static void __init find_zone_movable_pfns_for_nodes(void)
unsigned long usable_startpfn;
unsigned long kernelcore_node, kernelcore_remaining;
/* save the state before borrow the nodemask */
- nodemask_t saved_node_state = node_states[N_HIGH_MEMORY];
+ nodemask_t saved_node_state = node_states[N_MEMORY];
unsigned long totalpages = early_calculate_totalpages();
- int usable_nodes = nodes_weight(node_states[N_HIGH_MEMORY]);
+ int usable_nodes = nodes_weight(node_states[N_MEMORY]);
/*
* If movablecore was specified, calculate what size of
@@ -4736,7 +4736,7 @@ static void __init find_zone_movable_pfns_for_nodes(void)
restart:
/* Spread kernelcore memory as evenly as possible throughout nodes */
kernelcore_node = required_kernelcore / usable_nodes;
- for_each_node_state(nid, N_HIGH_MEMORY) {
+ for_each_node_state(nid, N_MEMORY) {
unsigned long start_pfn, end_pfn;
/*
@@ -4828,23 +4828,27 @@ restart:
out:
/* restore the node_state */
- node_states[N_HIGH_MEMORY] = saved_node_state;
+ node_states[N_MEMORY] = saved_node_state;
}
-/* Any regular memory on that node ? */
-static void __init check_for_regular_memory(pg_data_t *pgdat)
+/* Any regular or high memory on that node ? */
+static void check_for_memory(pg_data_t *pgdat, int nid)
{
-#ifdef CONFIG_HIGHMEM
enum zone_type zone_type;
- for (zone_type = 0; zone_type <= ZONE_NORMAL; zone_type++) {
+ if (N_MEMORY == N_NORMAL_MEMORY)
+ return;
+
+ for (zone_type = 0; zone_type <= ZONE_MOVABLE - 1; zone_type++) {
struct zone *zone = &pgdat->node_zones[zone_type];
if (zone->present_pages) {
- node_set_state(zone_to_nid(zone), N_NORMAL_MEMORY);
+ node_set_state(nid, N_HIGH_MEMORY);
+ if (N_NORMAL_MEMORY != N_HIGH_MEMORY &&
+ zone_type <= ZONE_NORMAL)
+ node_set_state(nid, N_NORMAL_MEMORY);
break;
}
}
-#endif
}
/**
@@ -4927,8 +4931,8 @@ void __init free_area_init_nodes(unsigned long *max_zone_pfn)
/* Any memory on that node */
if (pgdat->node_present_pages)
- node_set_state(nid, N_HIGH_MEMORY);
- check_for_regular_memory(pgdat);
+ node_set_state(nid, N_MEMORY);
+ check_for_memory(pgdat, nid);
}
}
--
1.7.4.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2012-10-29 15:48 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1351523301-20048-1-git-send-email-laijs@cn.fujitsu.com>
2012-10-29 15:20 ` [V5 PATCH 02/26] memory_hotplug: handle empty zone when online_movable/online_kernel Lai Jiangshan
2012-10-29 15:20 ` [V5 PATCH 03/26] memory_hotplug: ensure every online node has NORMAL memory Lai Jiangshan
2012-10-29 15:20 ` [V5 PATCH 08/26] memcontrol: use N_MEMORY instead N_HIGH_MEMORY Lai Jiangshan
2012-10-29 16:22 ` Michal Hocko
2012-10-29 20:40 ` David Rientjes
2012-10-29 20:58 ` Michal Hocko
2012-10-29 21:08 ` David Rientjes
2012-10-29 21:34 ` Michal Hocko
2012-10-31 13:18 ` Michal Hocko
2012-10-29 15:20 ` [V5 PATCH 09/26] oom: " Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 10/26] mm,migrate: " Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 11/26] mempolicy: " Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 12/26] hugetlb: " Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 13/26] vmstat: " Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 16/26] vmscan: " Lai Jiangshan
2012-10-29 15:21 ` Lai Jiangshan [this message]
2012-10-29 15:21 ` [V5 PATCH 18/26] hotplug: update nodemasks management Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 19/26] numa: add CONFIG_MOVABLE_NODE for movable-dedicated node Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 20/26] memory_hotplug: allow online/offline memory to result movable node Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 21/26] page_alloc: add kernelcore_max_addr Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 24/26] memblock: limit memory address from memblock Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 25/26] memblock: compare current_limit with end variable at memblock_find_in_range_node() Lai Jiangshan
2012-10-29 15:21 ` [V5 PATCH 26/26] mempolicy: fix is_valid_nodemask() Lai Jiangshan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351524078-20363-16-git-send-email-laijs@cn.fujitsu.com \
--to=laijs@cn.fujitsu.com \
--cc=akpm@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=isimatu.yasuaki@jp.fujitsu.com \
--cc=jiang.liu@huawei.com \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=mhocko@suse.cz \
--cc=minchan@kernel.org \
--cc=mingo@redhat.com \
--cc=penberg@kernel.org \
--cc=rientjes@google.com \
--cc=rusty@rustcorp.com.au \
--cc=tglx@linutronix.de \
--cc=tj@kernel.org \
--cc=x86@kernel.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox