From: Eric Dumazet <eric.dumazet@gmail.com>
To: Mike Kazantsev <mk.fraggod@gmail.com>
Cc: Paul Moore <paul@paul-moore.com>,
netdev@vger.kernel.org, linux-mm@kvack.org
Subject: Re: PROBLEM: Memory leak (at least with SLUB) from "secpath_dup" (xfrm) in 3.5+ kernels
Date: Sun, 21 Oct 2012 15:29:43 +0200 [thread overview]
Message-ID: <1350826183.13333.2243.camel@edumazet-glaptop> (raw)
In-Reply-To: <20121021062402.7c4c4cb8@sacrilege>
On Sun, 2012-10-21 at 06:24 +0600, Mike Kazantsev wrote:
> On Sun, 21 Oct 2012 04:45:40 +0600
> Mike Kazantsev <mk.fraggod@gmail.com> wrote:
>
> >
> > kmemleak mechanism seem to provide stack traces and interesting calls
> > for debugging of whatever is allocating the non-freed objects, so guess
> > I'll see if I can get more definitive (to my ignorant eye) "look here"
> > hint from it, and might drop one more mail with data from there.
> >
>
> kmemleak finds a lot (dozens megabytes of stack traces) of identical
> paths leading to a leaks:
>
> (for IPv6 packets)
> unreferenced object 0xffff88002fa25b00 (size 56):
> comm "softirq", pid 0, jiffies 4295009073 (age 295.620s)
> hex dump (first 32 bytes):
> 01 00 00 00 01 00 00 00 00 fc 6e 30 00 88 ff ff ..........n0....
> 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
> backtrace:
> [<ffffffff814cfa2b>] kmemleak_alloc+0x21/0x3e
> [<ffffffff810d9445>] kmem_cache_alloc+0xa5/0xb1
> [<ffffffff8147dd35>] secpath_dup+0x1b/0x5a
> [<ffffffff8147df39>] xfrm_input+0x64/0x484
> [<ffffffff814b1d2c>] xfrm6_rcv_spi+0x19/0x1b
> [<ffffffff814b1d4e>] xfrm6_rcv+0x20/0x22
> [<ffffffff8148c19f>] ip6_input_finish+0x203/0x31b
> [<ffffffff8148c622>] ip6_input+0x1e/0x50
> [<ffffffff8148c31c>] ip6_rcv_finish+0x65/0x69
> [<ffffffff8148c5a3>] ipv6_rcv+0x283/0x2e4
> [<ffffffff813ff8ba>] __netif_receive_skb+0x599/0x64c
> [<ffffffff813ffb08>] netif_receive_skb+0x47/0x78
> [<ffffffff81400644>] napi_skb_finish+0x21/0x53
> [<ffffffff81400778>] napi_gro_receive+0x102/0x10e
> [<ffffffff8136978b>] rtl8169_poll+0x326/0x4f9
> [<ffffffff813ffcda>] net_rx_action+0x9f/0x175
>
> (for IPv4 packets)
> unreferenced object 0xffff88003387e000 (size 56):
> comm "softirq", pid 0, jiffies 4294915803 (age 563.583s)
> hex dump (first 32 bytes):
> 01 00 00 00 01 00 00 00 00 48 be 30 00 88 ff ff .........H.0....
> 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
> backtrace:
> [<ffffffff814cfa2b>] kmemleak_alloc+0x21/0x3e
> [<ffffffff810d9445>] kmem_cache_alloc+0xa5/0xb1
> [<ffffffff8147dd35>] secpath_dup+0x1b/0x5a
> [<ffffffff8147df39>] xfrm_input+0x64/0x484
> [<ffffffff81474f7b>] xfrm4_rcv_encap+0x17/0x19
> [<ffffffff81474f9c>] xfrm4_rcv+0x1f/0x21
> [<ffffffff81430514>] ip_local_deliver_finish+0x170/0x22a
> [<ffffffff81430706>] ip_local_deliver+0x46/0x78
> [<ffffffff8143038d>] ip_rcv_finish+0x2bd/0x2d4
> [<ffffffff81430969>] ip_rcv+0x231/0x28c
> [<ffffffff813ff8ba>] __netif_receive_skb+0x599/0x64c
> [<ffffffff813ffb08>] netif_receive_skb+0x47/0x78
> [<ffffffff81400644>] napi_skb_finish+0x21/0x53
> [<ffffffff81400778>] napi_gro_receive+0x102/0x10e
> [<ffffffff8136978b>] rtl8169_poll+0x326/0x4f9
> [<ffffffff813ffcda>] net_rx_action+0x9f/0x175
>
> Object at the top and trace seem to be the same (between same
> IP-family) everywhere, just ages and addresses are different.
>
> IPv6 usage seem to be one important detail which I failed to mention.
> IPv4 traces seem to be really rare (only several of them), but that
> might be understandable because rsync was ran over IPv6.
>
> Still wasn't able to figure out what might cause the get's/put's
> disbalance with that commit, but was able to revert it, without
> anything bad happening (so far), using the patch below (in case
> issue might bite someone else before proper fix is found).
>
>
> --
>
> diff --git a/net/core/skbuff.c b/net/core/skbuff.c
> index 6e04b1f..52a9d40 100644
> --- a/net/core/skbuff.c
> +++ b/net/core/skbuff.c
> @@ -427,26 +427,8 @@ struct sk_buff *__netdev_alloc_skb(struct net_device *dev,
> unsigned int length, gfp_t gfp_mask)
> {
> struct sk_buff *skb = NULL;
> - unsigned int fragsz = SKB_DATA_ALIGN(length + NET_SKB_PAD) +
> - SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
> -
> - if (fragsz <= PAGE_SIZE && !(gfp_mask & (__GFP_WAIT | GFP_DMA))) {
> - void *data;
> -
> - if (sk_memalloc_socks())
> - gfp_mask |= __GFP_MEMALLOC;
> -
> - data = __netdev_alloc_frag(fragsz, gfp_mask);
> -
> - if (likely(data)) {
> - skb = build_skb(data, fragsz);
> - if (unlikely(!skb))
> - put_page(virt_to_head_page(data));
> - }
> - } else {
> - skb = __alloc_skb(length + NET_SKB_PAD, gfp_mask,
> + skb = __alloc_skb(length + NET_SKB_PAD, gfp_mask,
> SKB_ALLOC_RX, NUMA_NO_NODE);
> - }
> if (likely(skb)) {
> skb_reserve(skb, NET_SKB_PAD);
> skb->dev = dev;
>
>
Did you try linux-3.7-rc2 (or linux-3.7-rc1) ?
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2012-10-21 13:29 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-19 14:50 Mike Kazantsev
2012-10-19 17:36 ` Mike Kazantsev
2012-10-20 12:42 ` Paul Moore
2012-10-20 14:49 ` Mike Kazantsev
2012-10-20 22:45 ` Mike Kazantsev
2012-10-21 0:24 ` Mike Kazantsev
2012-10-21 13:29 ` Eric Dumazet [this message]
2012-10-21 13:57 ` Mike Kazantsev
2012-10-21 18:43 ` Mike Kazantsev
2012-10-21 19:51 ` Mike Kazantsev
2012-10-21 21:47 ` Eric Dumazet
2012-10-21 22:58 ` Mike Kazantsev
2012-10-22 8:15 ` Eric Dumazet
2012-10-22 12:06 ` Mike Kazantsev
2012-10-22 15:16 ` Eric Dumazet
2012-10-22 15:22 ` Eric Dumazet
2012-10-22 15:28 ` Eric Dumazet
2012-10-22 16:59 ` Mike Kazantsev
2012-10-22 17:24 ` Eric Dumazet
2012-10-22 19:03 ` [PATCH] net: fix secpath kmemleak Eric Dumazet
2012-10-22 19:17 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350826183.13333.2243.camel@edumazet-glaptop \
--to=eric.dumazet@gmail.com \
--cc=linux-mm@kvack.org \
--cc=mk.fraggod@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=paul@paul-moore.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox