From: Lai Jiangshan <laijs-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>
To: Mel Gorman <mel-wPRd99KPJ+uzQB+pC5nmwQ@public.gmane.org>
Cc: Christoph Lameter
<cl-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>,
Jiri Kosina <jkosina-AlSwsSmVLrQ@public.gmane.org>,
Dan Magenheimer
<dan.magenheimer-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Michal Hocko <mhocko-AlSwsSmVLrQ@public.gmane.org>,
Paul Gortmaker
<paul.gortmaker-CWA4WttNNZF54TAoqtyWWQ@public.gmane.org>,
Konstantin Khlebnikov
<khlebnikov-GEFAQzZX7r8dnm+yROfE0A@public.gmane.org>,
"H. Peter Anvin" <hpa-YMNOUZJC4hwAvxtiuMwx3w@public.gmane.org>,
Sam Ravnborg <sam-uyr5N9Q2VtJg9hUCZPvPmw@public.gmane.org>,
Gavin Shan
<shangw-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>,
Rik van Riel <riel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
cgroups-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
x86-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
Hugh Dickins <hughd-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
Ingo Molnar <mingo-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Mel Gorman <mgorman-l3A5Bk7waGM@public.gmane.org>,
KOSAKI Motohiro
<kosaki.motohiro-+CUm20s59erQFUHtdCDX3A@public.gmane.org>,
David Rientjes <rientjes-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
Petr Holasek <pholasek-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
linux-mm-Bw31MaZKKs3YtjvyW6yDsg@public.gmane.org,
Wanlong Gao <gaowanlong-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>,
Djalal Harouni <tixxdz-Umm1ozX2/EEdnm+yROfE0A@public.gmane.org>,
Rusty Russell <rusty-8n+1lVoiYb80n/F98K4Iww@public.gmane.org>,
Wen Congyang <wency-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>,
Peter Zijlstra <a.p.zijlstra@ch>
Subject: [RFC PATCH 13/23 V2] page_alloc: use N_MEMORY instead N_HIGH_MEMORY change the node_states initialization
Date: Thu, 2 Aug 2012 10:53:01 +0800 [thread overview]
Message-ID: <1343875991-7533-14-git-send-email-laijs@cn.fujitsu.com> (raw)
In-Reply-To: <1343875991-7533-1-git-send-email-laijs-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>
N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.
The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.
Since we introduced N_MEMORY, we update the initialization of node_states.
Signed-off-by: Lai Jiangshan <laijs-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>
---
arch/x86/mm/init_64.c | 4 +++-
mm/page_alloc.c | 40 ++++++++++++++++++++++------------------
2 files changed, 25 insertions(+), 19 deletions(-)
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 2b6b4a3..005f00c 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -625,7 +625,9 @@ void __init paging_init(void)
* numa support is not compiled in, and later node_set_state
* will not set it back.
*/
- node_clear_state(0, N_NORMAL_MEMORY);
+ node_clear_state(0, N_MEMORY);
+ if (N_MEMORY != N_NORMAL_MEMORY)
+ node_clear_state(0, N_NORMAL_MEMORY);
zone_sizes_init();
}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 4a4f921..0571f2a 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1646,7 +1646,7 @@ bool zone_watermark_ok_safe(struct zone *z, int order, unsigned long mark,
*
* If the zonelist cache is present in the passed in zonelist, then
* returns a pointer to the allowed node mask (either the current
- * tasks mems_allowed, or node_states[N_HIGH_MEMORY].)
+ * tasks mems_allowed, or node_states[N_MEMORY].)
*
* If the zonelist cache is not available for this zonelist, does
* nothing and returns NULL.
@@ -1675,7 +1675,7 @@ static nodemask_t *zlc_setup(struct zonelist *zonelist, int alloc_flags)
allowednodes = !in_interrupt() && (alloc_flags & ALLOC_CPUSET) ?
&cpuset_current_mems_allowed :
- &node_states[N_HIGH_MEMORY];
+ &node_states[N_MEMORY];
return allowednodes;
}
@@ -3070,7 +3070,7 @@ static int find_next_best_node(int node, nodemask_t *used_node_mask)
return node;
}
- for_each_node_state(n, N_HIGH_MEMORY) {
+ for_each_node_state(n, N_MEMORY) {
/* Don't want a node to appear more than once */
if (node_isset(n, *used_node_mask))
@@ -3212,7 +3212,7 @@ static int default_zonelist_order(void)
* local memory, NODE_ORDER may be suitable.
*/
average_size = total_size /
- (nodes_weight(node_states[N_HIGH_MEMORY]) + 1);
+ (nodes_weight(node_states[N_MEMORY]) + 1);
for_each_online_node(nid) {
low_kmem_size = 0;
total_size = 0;
@@ -4587,7 +4587,7 @@ unsigned long __init find_min_pfn_with_active_regions(void)
/*
* early_calculate_totalpages()
* Sum pages in active regions for movable zone.
- * Populate N_HIGH_MEMORY for calculating usable_nodes.
+ * Populate N_MEMORY for calculating usable_nodes.
*/
static unsigned long __init early_calculate_totalpages(void)
{
@@ -4600,7 +4600,7 @@ static unsigned long __init early_calculate_totalpages(void)
totalpages += pages;
if (pages)
- node_set_state(nid, N_HIGH_MEMORY);
+ node_set_state(nid, N_MEMORY);
}
return totalpages;
}
@@ -4617,9 +4617,9 @@ static void __init find_zone_movable_pfns_for_nodes(void)
unsigned long usable_startpfn;
unsigned long kernelcore_node, kernelcore_remaining;
/* save the state before borrow the nodemask */
- nodemask_t saved_node_state = node_states[N_HIGH_MEMORY];
+ nodemask_t saved_node_state = node_states[N_MEMORY];
unsigned long totalpages = early_calculate_totalpages();
- int usable_nodes = nodes_weight(node_states[N_HIGH_MEMORY]);
+ int usable_nodes = nodes_weight(node_states[N_MEMORY]);
/*
* If movablecore was specified, calculate what size of
@@ -4654,7 +4654,7 @@ static void __init find_zone_movable_pfns_for_nodes(void)
restart:
/* Spread kernelcore memory as evenly as possible throughout nodes */
kernelcore_node = required_kernelcore / usable_nodes;
- for_each_node_state(nid, N_HIGH_MEMORY) {
+ for_each_node_state(nid, N_MEMORY) {
unsigned long start_pfn, end_pfn;
/*
@@ -4746,23 +4746,27 @@ restart:
out:
/* restore the node_state */
- node_states[N_HIGH_MEMORY] = saved_node_state;
+ node_states[N_MEMORY] = saved_node_state;
}
-/* Any regular memory on that node ? */
-static void check_for_regular_memory(pg_data_t *pgdat)
+/* Any regular or high memory on that node ? */
+static void check_for_memory(pg_data_t *pgdat, int nid)
{
-#ifdef CONFIG_HIGHMEM
enum zone_type zone_type;
- for (zone_type = 0; zone_type <= ZONE_NORMAL; zone_type++) {
+ if (N_MEMORY == N_NORMAL_MEMORY)
+ return;
+
+ for (zone_type = 0; zone_type <= ZONE_MOVABLE - 1; zone_type++) {
struct zone *zone = &pgdat->node_zones[zone_type];
if (zone->present_pages) {
- node_set_state(zone_to_nid(zone), N_NORMAL_MEMORY);
+ node_set_state(nid, N_HIGH_MEMORY);
+ if (N_NORMAL_MEMORY != N_HIGH_MEMORY &&
+ zone_type <= ZONE_NORMAL)
+ node_set_state(nid, N_NORMAL_MEMORY);
break;
}
}
-#endif
}
/**
@@ -4845,8 +4849,8 @@ void __init free_area_init_nodes(unsigned long *max_zone_pfn)
/* Any memory on that node */
if (pgdat->node_present_pages)
- node_set_state(nid, N_HIGH_MEMORY);
- check_for_regular_memory(pgdat);
+ node_set_state(nid, N_MEMORY);
+ check_for_memory(pgdat, nid);
}
}
--
1.7.1
next prev parent reply other threads:[~2012-08-02 2:53 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-02 2:52 [RFC PATCH 00/23 V2] memory, numa: introduce MOVABLE-dedicated node and online_movable for hotplug Lai Jiangshan
[not found] ` <1343875991-7533-1-git-send-email-laijs-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>
2012-08-02 2:52 ` [RFC PATCH 01/23 V2] node_states: introduce N_MEMORY Lai Jiangshan
2012-08-02 16:01 ` Christoph Lameter
2012-08-04 13:38 ` Hillf Danton
2012-08-02 2:52 ` [RFC PATCH 02/23 V2] cpuset: use N_MEMORY instead N_HIGH_MEMORY Lai Jiangshan
2012-08-04 13:51 ` Hillf Danton
2012-08-02 2:52 ` [RFC PATCH 03/23 V2] procfs: " Lai Jiangshan
2012-08-04 13:53 ` Hillf Danton
2012-08-02 2:52 ` [RFC PATCH 04/23 V2] oom: " Lai Jiangshan
2012-08-04 13:54 ` Hillf Danton
2012-08-02 2:52 ` [RFC PATCH 05/23 V2] mm,migrate: " Lai Jiangshan
2012-08-02 2:52 ` [RFC PATCH 06/23 V2] mempolicy: " Lai Jiangshan
2012-08-02 2:52 ` [RFC PATCH 07/23 V2] memcontrol: " Lai Jiangshan
2012-08-02 2:52 ` [RFC PATCH 08/23 V2] hugetlb: " Lai Jiangshan
2012-08-02 2:52 ` [RFC PATCH 09/23 V2] vmstat: " Lai Jiangshan
2012-08-02 2:52 ` [RFC PATCH 10/23 V2] kthread: " Lai Jiangshan
2012-08-02 2:52 ` [RFC PATCH 11/23 V2] init: " Lai Jiangshan
2012-08-02 2:53 ` [RFC PATCH 12/23 V2] vmscan: " Lai Jiangshan
2012-08-04 13:55 ` Hillf Danton
2012-08-02 2:53 ` Lai Jiangshan [this message]
2012-08-02 2:53 ` [RFC PATCH 14/23 V2] slub, hotplug: ignore unrelated node's hot-adding and hot-removing Lai Jiangshan
2012-08-02 16:04 ` Christoph Lameter
[not found] ` <alpine.DEB.2.00.1208021102560.23049-sBS69tsa9Uj/9pzu0YdTqQ@public.gmane.org>
2012-08-06 5:39 ` Lai Jiangshan
2012-08-02 2:53 ` [RFC PATCH 15/23 V2] memory_hotplug: fix missing nodemask management Lai Jiangshan
2012-08-02 2:53 ` [RFC PATCH 16/23 V2] numa: add CONFIG_MOVABLE_NODE for movable-dedicated node Lai Jiangshan
2012-08-02 16:06 ` Christoph Lameter
2012-08-02 2:53 ` [RFC PATCH 17/23 V2] page_alloc.c: don't subtract unrelated memmap from zone's present pages Lai Jiangshan
2012-08-02 2:53 ` [RFC PATCH 18/23 V2] page_alloc: add kernelcore_max_addr Lai Jiangshan
2012-08-02 2:53 ` [RFC PATCH 19/23 V2] x86: get pg_data_t's memory from other node Lai Jiangshan
2012-08-02 2:53 ` [RFC PATCH 20/23 V2] x86: use memblock_set_current_limit() to set memblock.current_limit Lai Jiangshan
2012-08-02 2:53 ` [RFC PATCH 21/23 V2] memblock: limit memory address from memblock Lai Jiangshan
2012-08-02 2:53 ` [RFC PATCH 22/23 V2] memblock: compare current_limit with end variable at memblock_find_in_range_node() Lai Jiangshan
2012-08-02 2:53 ` [RFC PATCH 23/23 V2] mm, memory-hotplug: add online_movable Lai Jiangshan
[not found] <1343887288-8866-1-git-send-email-laijs@cn.fujitsu.com>
2012-08-02 6:01 ` [RFC PATCH 13/23 V2] page_alloc: use N_MEMORY instead N_HIGH_MEMORY change the node_states initialization Lai Jiangshan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343875991-7533-14-git-send-email-laijs@cn.fujitsu.com \
--to=laijs-bthxqxjhjhxqfuhtdcdx3a@public.gmane.org \
--cc=a.p.zijlstra@ch \
--cc=cgroups-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=cl-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
--cc=dan.magenheimer-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org \
--cc=gaowanlong-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org \
--cc=hpa-YMNOUZJC4hwAvxtiuMwx3w@public.gmane.org \
--cc=hughd-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=jkosina-AlSwsSmVLrQ@public.gmane.org \
--cc=khlebnikov-GEFAQzZX7r8dnm+yROfE0A@public.gmane.org \
--cc=kosaki.motohiro-+CUm20s59erQFUHtdCDX3A@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mm-Bw31MaZKKs3YtjvyW6yDsg@public.gmane.org \
--cc=mel-wPRd99KPJ+uzQB+pC5nmwQ@public.gmane.org \
--cc=mgorman-l3A5Bk7waGM@public.gmane.org \
--cc=mhocko-AlSwsSmVLrQ@public.gmane.org \
--cc=mingo-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=paul.gortmaker-CWA4WttNNZF54TAoqtyWWQ@public.gmane.org \
--cc=pholasek-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=riel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=rientjes-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=rusty-8n+1lVoiYb80n/F98K4Iww@public.gmane.org \
--cc=sam-uyr5N9Q2VtJg9hUCZPvPmw@public.gmane.org \
--cc=shangw-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org \
--cc=tixxdz-Umm1ozX2/EEdnm+yROfE0A@public.gmane.org \
--cc=wency-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org \
--cc=x86-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox