From: Gilad Ben-Yossef <gilad@benyossef.com>
To: linux-kernel@vger.kernel.org
Cc: Gilad Ben-Yossef <gilad@benyossef.com>,
Andrew Morton <akpm@linux-foundation.org>,
Chris Metcalf <cmetcalf@tilera.com>,
Christoph Lameter <cl@linux-foundation.org>,
Frederic Weisbecker <fweisbec@gmail.com>,
Russell King <linux@arm.linux.org.uk>,
linux-mm@kvack.org, Pekka Enberg <penberg@kernel.org>,
Matt Mackall <mpm@selenic.com>,
Sasha Levin <levinsasha928@gmail.com>,
Rik van Riel <riel@redhat.com>, Andi Kleen <andi@firstfloor.org>,
Alexander Viro <viro@zeniv.linux.org.uk>,
linux-fsdevel@vger.kernel.org, Avi Kivity <avi@redhat.com>,
Kosaki Motohiro <kosaki.motohiro@gmail.com>,
Milton Miller <miltonm@bga.com>
Subject: [PATCH v9 4/8] smp: add func to IPI cpus based on parameter func
Date: Thu, 9 Feb 2012 10:36:21 +0200 [thread overview]
Message-ID: <1328776585-22518-5-git-send-email-gilad@benyossef.com> (raw)
In-Reply-To: <1328776585-22518-1-git-send-email-gilad@benyossef.com>
Add the on_each_cpu_cond() function that wraps on_each_cpu_mask()
and calculates the cpumask of cpus to IPI by calling a function supplied
as a parameter in order to determine whether to IPI each specific cpu.
The function works around allocation failure of cpumask variable in
CONFIG_CPUMASK_OFFSTACK=y by itereating over cpus sending an IPI a
time via smp_call_function_single().
The function is useful since it allows to seperate the specific
code that decided in each case whether to IPI a specific cpu for
a specific request from the common boilerplate code of handling
creating the mask, handling failures etc.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
CC: Chris Metcalf <cmetcalf@tilera.com>
CC: Christoph Lameter <cl@linux-foundation.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: linux-mm@kvack.org
CC: Pekka Enberg <penberg@kernel.org>
CC: Matt Mackall <mpm@selenic.com>
CC: Sasha Levin <levinsasha928@gmail.com>
CC: Rik van Riel <riel@redhat.com>
CC: Andi Kleen <andi@firstfloor.org>
CC: Alexander Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
CC: Avi Kivity <avi@redhat.com>
CC: Kosaki Motohiro <kosaki.motohiro@gmail.com>
CC: Milton Miller <miltonm@bga.com>
---
include/linux/smp.h | 25 ++++++++++++++++++++
kernel/smp.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 87 insertions(+), 0 deletions(-)
diff --git a/include/linux/smp.h b/include/linux/smp.h
index d0adb78..46e2267 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -109,6 +109,15 @@ void on_each_cpu_mask(const struct cpumask *mask, smp_call_func_t func,
void *info, bool wait);
/*
+ * Call a function on each processor for which the supplied function
+ * cond_func returns a positive value. This may include the local
+ * processor.
+ */
+void on_each_cpu_cond(bool (*cond_func)(int cpu, void *info),
+ smp_call_func_t func, void *info, bool wait,
+ gfp_t gfp_flags);
+
+/*
* Mark the boot cpu "online" so that it can call console drivers in
* printk() and can access its per-cpu storage.
*/
@@ -153,6 +162,22 @@ static inline int up_smp_call_function(smp_call_func_t func, void *info)
local_irq_enable(); \
} \
} while (0)
+/*
+ * Preemption is disabled here to make sure the
+ * cond_func is called under the same condtions in UP
+ * and SMP.
+ */
+#define on_each_cpu_cond(cond_func, func, info, wait, gfp_flags) \
+ do {
+ void *__info = (info); \
+ preempt_disable(); \
+ if ((cond_func)(0, __info)) { \
+ local_irq_disable(); \
+ (func)(__info); \
+ local_irq_enable(); \
+ } \
+ preempt_enable(); \
+ } while (0)
static inline void smp_send_reschedule(int cpu) { }
#define num_booting_cpus() 1
diff --git a/kernel/smp.c b/kernel/smp.c
index a081e6c..893e588 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -730,3 +730,65 @@ void on_each_cpu_mask(const struct cpumask *mask, smp_call_func_t func,
put_cpu();
}
EXPORT_SYMBOL(on_each_cpu_mask);
+
+/*
+ * on_each_cpu_cond(): Call a function on each processor for which
+ * the supplied function cond_func returns true, optionally waiting
+ * for all the required CPUs to finish. This may include the local
+ * processor.
+ * @cond_func: A callback function that is passed a cpu id and
+ * the the info parameter. The function is called
+ * with preemption disabled. The function should
+ * return a blooean value indicating whether to IPI
+ * the specified CPU.
+ * @func: The function to run on all applicable CPUs.
+ * This must be fast and non-blocking.
+ * @info: An arbitrary pointer to pass to both functions.
+ * @wait: If true, wait (atomically) until function has
+ * completed on other CPUs.
+ * @gfp_flags: GFP flags to use when allocating the cpumask
+ * used internally by the function.
+ *
+ * The function might sleep if the GFP flags indicates a non
+ * atomic allocation is allowed.
+ *
+ * Preemption is disabled to protect against CPU going offline but not
+ * online. CPUs going online during the call will not be seen or sent
+ * an IPI.
+ *
+ * You must not call this function with disabled interrupts or
+ * from a hardware interrupt handler or from a bottom half handler.
+ */
+void on_each_cpu_cond(bool (*cond_func)(int cpu, void *info),
+ smp_call_func_t func, void *info, bool wait,
+ gfp_t gfp_flags)
+{
+ cpumask_var_t cpus;
+ int cpu, ret;
+
+ might_sleep_if(gfp_flags & __GFP_WAIT);
+
+ if (likely(zalloc_cpumask_var(&cpus, (gfp_flags|__GFP_NOWARN)))) {
+ preempt_disable();
+ for_each_online_cpu(cpu)
+ if (cond_func(cpu, info))
+ cpumask_set_cpu(cpu, cpus);
+ on_each_cpu_mask(cpus, func, info, wait);
+ preempt_enable();
+ free_cpumask_var(cpus);
+ } else {
+ /*
+ * No free cpumask, bother. No matter, we'll
+ * just have to IPI them one by one.
+ */
+ preempt_disable();
+ for_each_online_cpu(cpu)
+ if (cond_func(cpu, info)) {
+ ret = smp_call_function_single(cpu, func,
+ info, wait);
+ WARN_ON_ONCE(!ret);
+ }
+ preempt_enable();
+ }
+}
+EXPORT_SYMBOL(on_each_cpu_cond);
--
1.7.0.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2012-02-09 8:37 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1328776585-22518-1-git-send-email-gilad@benyossef.com>
2012-02-09 8:36 ` [PATCH v9 1/8] smp: introduce a generic on_each_cpu_mask function Gilad Ben-Yossef
2012-02-09 8:36 ` [PATCH v9 2/8] arm: move arm over to generic on_each_cpu_mask Gilad Ben-Yossef
2012-02-09 8:36 ` [PATCH v9 3/8] tile: move tile to use " Gilad Ben-Yossef
2012-02-09 8:36 ` Gilad Ben-Yossef [this message]
2012-02-09 22:26 ` [PATCH v9 4/8] smp: add func to IPI cpus based on parameter func Andrew Morton
2012-02-09 8:36 ` [PATCH v9 5/8] slub: only IPI CPUs that have per cpu obj to flush Gilad Ben-Yossef
2012-02-09 8:36 ` [PATCH v9 6/8] fs: only send IPI to invalidate LRU BH when needed Gilad Ben-Yossef
2012-02-09 8:36 ` [PATCH v9 7/8] mm: only IPI CPUs to drain local pages if they exist Gilad Ben-Yossef
2012-02-09 8:36 ` [PATCH v9 8/8] mm: add vmstat counters for tracking PCP drains Gilad Ben-Yossef
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1328776585-22518-5-git-send-email-gilad@benyossef.com \
--to=gilad@benyossef.com \
--cc=akpm@linux-foundation.org \
--cc=andi@firstfloor.org \
--cc=avi@redhat.com \
--cc=cl@linux-foundation.org \
--cc=cmetcalf@tilera.com \
--cc=fweisbec@gmail.com \
--cc=kosaki.motohiro@gmail.com \
--cc=levinsasha928@gmail.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux@arm.linux.org.uk \
--cc=miltonm@bga.com \
--cc=mpm@selenic.com \
--cc=penberg@kernel.org \
--cc=riel@redhat.com \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox