From: Michel Lespinasse <walken@google.com>
To: Andrew Morton <akpm@linux-foundation.org>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org
Cc: Andrea Arcangeli <aarcange@redhat.com>,
Hugh Dickins <hughd@google.com>,
Minchan Kim <minchan.kim@gmail.com>,
Johannes Weiner <jweiner@redhat.com>,
Rik van Riel <riel@redhat.com>, Mel Gorman <mgorman@suse.de>,
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>,
Shaohua Li <shaohua.li@intel.com>
Subject: [PATCH 3/9] mm: rcu read lock when getting from tail to head page
Date: Fri, 19 Aug 2011 00:48:25 -0700 [thread overview]
Message-ID: <1313740111-27446-4-git-send-email-walken@google.com> (raw)
In-Reply-To: <1313740111-27446-1-git-send-email-walken@google.com>
In the tail page case, put_compound_page() uses get_page_unless_zero()
to get a reference on the head page. There is a small possibility that
the compound page might get split, and the head page freed, before that
reference can be obtained.
Similarly, page_trans_compound_anon_split() needs to get a reference
on a a THP page's head before it can proceed with splitting it.
In order to guarantee page count stability one rcu grace period after
allocation, as described in page_cache_get_speculative() comment in
pagemap.h, we need to take the rcu read lock from the time we locate the
head page until we get a reference on it.
Signed-off-by: Michel Lespinasse <walken@google.com>
---
mm/ksm.c | 4 ++++
mm/swap.c | 8 +++++++-
2 files changed, 11 insertions(+), 1 deletions(-)
diff --git a/mm/ksm.c b/mm/ksm.c
index 9a68b0c..0eec889 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -817,10 +817,12 @@ out:
static int page_trans_compound_anon_split(struct page *page)
{
int ret = 0;
+ rcu_read_lock();
struct page *transhuge_head = page_trans_compound_anon(page);
if (transhuge_head) {
/* Get the reference on the head to split it. */
if (get_page_unless_zero(transhuge_head)) {
+ rcu_read_unlock();
/*
* Recheck we got the reference while the head
* was still anonymous.
@@ -834,10 +836,12 @@ static int page_trans_compound_anon_split(struct page *page)
*/
ret = 1;
put_page(transhuge_head);
+ return ret;
} else
/* Retry later if split_huge_page run from under us. */
ret = 1;
}
+ rcu_read_unlock();
return ret;
}
diff --git a/mm/swap.c b/mm/swap.c
index 3a442f1..ac617dc 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -78,7 +78,10 @@ static void put_compound_page(struct page *page)
{
if (unlikely(PageTail(page))) {
/* __split_huge_page_refcount can run under us */
- struct page *page_head = page->first_page;
+ struct page *page_head;
+
+ rcu_read_lock();
+ page_head = page->first_page;
smp_rmb();
/*
* If PageTail is still set after smp_rmb() we can be sure
@@ -87,6 +90,8 @@ static void put_compound_page(struct page *page)
*/
if (likely(PageTail(page) && get_page_unless_zero(page_head))) {
unsigned long flags;
+
+ rcu_read_unlock();
/*
* Verify that our page_head wasn't converted
* to a a regular page before we got a
@@ -140,6 +145,7 @@ static void put_compound_page(struct page *page)
}
} else {
/* page_head is a dangling pointer */
+ rcu_read_unlock();
VM_BUG_ON(PageTail(page));
goto out_put_single;
}
--
1.7.3.1
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2011-08-19 7:48 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-19 7:48 [PATCH 0/9] Use RCU to stabilize page counts Michel Lespinasse
2011-08-19 7:48 ` [PATCH 1/9] mm: rcu read lock for getting reference on pages in migration_entry_wait() Michel Lespinasse
2011-08-19 7:48 ` [PATCH 2/9] mm: avoid calling get_page_unless_zero() when charging cgroups Michel Lespinasse
2011-08-19 7:48 ` Michel Lespinasse [this message]
2011-08-19 7:48 ` [PATCH 4/9] mm: use get_page in deactivate_page() Michel Lespinasse
2011-08-19 7:48 ` [PATCH 5/9] kvm: use get_page instead of get_page_unless_zero Michel Lespinasse
2011-08-19 7:48 ` [PATCH 6/9] mm: assert that get_page_unless_zero() callers hold the rcu lock Michel Lespinasse
2011-08-19 23:28 ` Andi Kleen
2011-08-19 7:48 ` [PATCH 7/9] rcu: rcu_get_gp_cookie() / rcu_gp_cookie_elapsed() stand-ins Michel Lespinasse
2011-08-19 7:48 ` [PATCH 8/9] mm: add API for setting a grace period cookie on compound pages Michel Lespinasse
2011-08-19 7:48 ` [PATCH 9/9] mm: make sure tail page counts are stable before splitting THP pages Michel Lespinasse
2011-08-19 7:53 ` [PATCH 0/9] Use RCU to stabilize page counts Michel Lespinasse
2011-08-22 21:33 ` [PATCH] thp: tail page refcounting fix Andrea Arcangeli
2011-08-23 14:55 ` Andrea Arcangeli
2011-08-23 16:45 ` Minchan Kim
2011-08-23 16:54 ` Andrea Arcangeli
2011-08-23 19:52 ` Michel Lespinasse
2011-08-24 0:09 ` Andrea Arcangeli
2011-08-24 0:27 ` Andrea Arcangeli
2011-08-24 13:34 ` [PATCH] thp: tail page refcounting fix #2 Andrea Arcangeli
2011-08-26 6:24 ` Michel Lespinasse
2011-08-26 16:10 ` Andrea Arcangeli
2011-08-26 18:54 ` [PATCH] thp: tail page refcounting fix #3 Andrea Arcangeli
2011-08-27 9:41 ` Michel Lespinasse
2011-08-27 17:34 ` [PATCH] thp: tail page refcounting fix #4 Andrea Arcangeli
2011-08-29 4:20 ` Minchan Kim
2011-09-01 15:24 ` [PATCH] thp: tail page refcounting fix #5 Andrea Arcangeli
2011-09-01 22:27 ` Michel Lespinasse
2011-09-01 23:28 ` Andrew Morton
2011-09-01 23:45 ` Andi Kleen
2011-09-02 0:20 ` Andrea Arcangeli
2011-09-02 1:17 ` Andi Kleen
2011-09-02 0:03 ` Andrew Morton
2011-09-08 16:51 ` [PATCH] thp: tail page refcounting fix #6 Andrea Arcangeli
2011-09-23 15:57 ` Peter Zijlstra
2011-09-30 13:58 ` Andrea Arcangeli
2011-10-16 20:37 ` thp: gup_fast ppc tail refcounting [was Re: [PATCH] thp: tail page refcounting fix #6] Andrea Arcangeli
2011-10-16 20:37 ` [PATCH 1/4] powerpc: remove superfluous PageTail checks on the pte gup_fast Andrea Arcangeli
2011-10-16 20:37 ` [PATCH 2/4] powerpc: get_hugepte() don't put_page() the wrong page Andrea Arcangeli
2011-10-16 20:37 ` [PATCH 3/4] powerpc: gup_hugepte() avoid to free the head page too many times Andrea Arcangeli
2011-10-16 20:37 ` [PATCH 4/4] powerpc: gup_hugepte() support THP based tail recounting Andrea Arcangeli
2011-10-16 20:40 ` thp: gup_fast ppc tail refcounting [was Re: [PATCH] thp: tail page refcounting fix #6] Andrea Arcangeli
2011-10-16 20:40 ` [PATCH 1/4] powerpc: remove superfluous PageTail checks on the pte gup_fast Andrea Arcangeli
2011-10-16 20:40 ` [PATCH 2/4] powerpc: get_hugepte() don't put_page() the wrong page Andrea Arcangeli
2011-10-16 20:40 ` [PATCH 3/4] powerpc: gup_hugepte() avoid to free the head page too many times Andrea Arcangeli
2011-10-16 20:40 ` [PATCH 4/4] powerpc: gup_hugepte() support THP based tail recounting Andrea Arcangeli
2011-10-17 14:41 ` thp: gup_fast s390/sparc tail refcounting [was Re: [PATCH] thp: tail page refcounting fix #6] Andrea Arcangeli
2011-10-17 14:41 ` [PATCH 1/3] s390: gup_huge_pmd() support THP tail recounting Andrea Arcangeli
2011-10-17 14:41 ` [PATCH 2/3] sparc: gup_pte_range() support THP based " Andrea Arcangeli
2011-10-17 22:44 ` David Miller
2011-10-17 14:41 ` [PATCH 3/3] thp: share get_huge_page_tail() Andrea Arcangeli
2011-10-17 21:32 ` fix two more s390/sparc gup_fast bugs Andrea Arcangeli
2011-10-17 21:32 ` [PATCH 1/2] s390: gup_huge_pmd() return 0 if pte changes Andrea Arcangeli
2011-10-17 21:32 ` [PATCH 2/2] powerpc: " Andrea Arcangeli
2011-08-29 22:40 ` [PATCH] thp: tail page refcounting fix #4 Michel Lespinasse
2011-08-29 23:30 ` Andrea Arcangeli
2011-08-26 19:28 ` [PATCH] thp: tail page refcounting fix #2 Andrea Arcangeli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1313740111-27446-4-git-send-email-walken@google.com \
--to=walken@google.com \
--cc=aarcange@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=hughd@google.com \
--cc=jweiner@redhat.com \
--cc=kosaki.motohiro@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=minchan.kim@gmail.com \
--cc=riel@redhat.com \
--cc=shaohua.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox