linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Minchan Kim <minchan.kim@gmail.com>
To: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>,
	Rik van Riel <riel@redhat.com>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [patch 3/3] vmscan: detect mapped file pages used only once
Date: Wed, 24 Feb 2010 00:03:13 +0900	[thread overview]
Message-ID: <1266937393.2723.46.camel@barrios-desktop> (raw)
In-Reply-To: <1266868150-25984-4-git-send-email-hannes@cmpxchg.org>

On Mon, 2010-02-22 at 20:49 +0100, Johannes Weiner wrote:
> The VM currently assumes that an inactive, mapped and referenced file
> page is in use and promotes it to the active list.
> 
> However, every mapped file page starts out like this and thus a problem
> arises when workloads create a stream of such pages that are used only
> for a short time.  By flooding the active list with those pages, the VM
> quickly gets into trouble finding eligible reclaim canditates.  The
> result is long allocation latencies and eviction of the wrong pages.
> 
> This patch reuses the PG_referenced page flag (used for unmapped file
> pages) to implement a usage detection that scales with the speed of
> LRU list cycling (i.e. memory pressure).
> 
> If the scanner encounters those pages, the flag is set and the page
> cycled again on the inactive list.  Only if it returns with another
> page table reference it is activated.  Otherwise it is reclaimed as
> 'not recently used cache'.
> 
> This effectively changes the minimum lifetime of a used-once mapped
> file page from a full memory cycle to an inactive list cycle, which
> allows it to occur in linear streams without affecting the stable
> working set of the system.
> 
> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
> ---
>  include/linux/rmap.h |    2 +-
>  mm/rmap.c            |    3 ---
>  mm/vmscan.c          |   45 +++++++++++++++++++++++++++++++++++----------
>  3 files changed, 36 insertions(+), 14 deletions(-)
> 
> diff --git a/include/linux/rmap.h b/include/linux/rmap.h
> index b019ae6..f4accb5 100644
> --- a/include/linux/rmap.h
> +++ b/include/linux/rmap.h
> @@ -181,7 +181,7 @@ static inline int page_referenced(struct page *page, int is_locked,
>  				  unsigned long *vm_flags)
>  {
>  	*vm_flags = 0;
> -	return TestClearPageReferenced(page);
> +	return 0;
>  }
>  
>  #define try_to_unmap(page, refs) SWAP_FAIL
> diff --git a/mm/rmap.c b/mm/rmap.c
> index 278cd27..5a48bda 100644
> --- a/mm/rmap.c
> +++ b/mm/rmap.c
> @@ -511,9 +511,6 @@ int page_referenced(struct page *page,
>  	int referenced = 0;
>  	int we_locked = 0;
>  
> -	if (TestClearPageReferenced(page))
> -		referenced++;
> -

>From now on, page_referenced see only page table for reference. 
So let's comment it on function description.
like "This function checks reference from only pte"

>  	*vm_flags = 0;
>  	if (page_mapped(page) && page_rmapping(page)) {
>  		if (!is_locked && (!PageAnon(page) || PageKsm(page))) {
> diff --git a/mm/vmscan.c b/mm/vmscan.c
> index a8e4cbe..674a78b 100644
> --- a/mm/vmscan.c
> +++ b/mm/vmscan.c
> @@ -561,18 +561,18 @@ redo:
>  enum page_references {
>  	PAGEREF_RECLAIM,
>  	PAGEREF_RECLAIM_CLEAN,
> +	PAGEREF_KEEP,
>  	PAGEREF_ACTIVATE,
>  };
>  
>  static enum page_references page_check_references(struct page *page,
>  						  struct scan_control *sc)
>  {
> +	int referenced_ptes, referenced_page;
>  	unsigned long vm_flags;
> -	int referenced;
>  
> -	referenced = page_referenced(page, 1, sc->mem_cgroup, &vm_flags);
> -	if (!referenced)
> -		return PAGEREF_RECLAIM;
> +	referenced_ptes = page_referenced(page, 1, sc->mem_cgroup, &vm_flags);
> +	referenced_page = TestClearPageReferenced(page);
>  
>  	/* Lumpy reclaim - ignore references */
>  	if (sc->order > PAGE_ALLOC_COSTLY_ORDER)
> @@ -582,11 +582,36 @@ static enum page_references page_check_references(struct page *page,
>  	if (vm_flags & VM_LOCKED)
>  		return PAGEREF_RECLAIM;
>  
> -	if (page_mapped(page))
> -		return PAGEREF_ACTIVATE;
> +	if (referenced_ptes) {
> +		if (PageAnon(page))
> +			return PAGEREF_ACTIVATE;
> +		/*
> +		 * All mapped pages start out with page table
> +		 * references from the instantiating fault, so we need
> +		 * to look twice if a mapped file page is used more
> +		 * than once.
> +		 *
> +		 * Mark it and spare it for another trip around the
> +		 * inactive list.  Another page table reference will
> +		 * lead to its activation.
> +		 *
> +		 * Note: the mark is set for activated pages as well
> +		 * so that recently deactivated but used pages are
> +		 * quickly recovered.
> +		 */
> +		SetPageReferenced(page);
> +
> +		if (referenced_page)
> +			return PAGEREF_ACTIVATE;
> +
> +		return PAGEREF_KEEP;
> +	}
>  
>  	/* Reclaim if clean, defer dirty pages to writeback */
> -	return PAGEREF_RECLAIM_CLEAN;
> +	if (referenced_page)
> +		return PAGEREF_RECLAIM_CLEAN;
> +
> +	return PAGEREF_RECLAIM;
>  }
>  
>  /*
> @@ -654,6 +679,8 @@ static unsigned long shrink_page_list(struct list_head *page_list,
>  		switch (references) {
>  		case PAGEREF_ACTIVATE:
>  			goto activate_locked;
> +		case PAGEREF_KEEP:
> +			goto keep_locked;
>  		case PAGEREF_RECLAIM:
>  		case PAGEREF_RECLAIM_CLEAN:
>  			; /* try to reclaim the page below */
> @@ -1356,9 +1383,7 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone,
>  			continue;
>  		}
>  
> -		/* page_referenced clears PageReferenced */
> -		if (page_mapped(page) &&
> -		    page_referenced(page, 0, sc->mem_cgroup, &vm_flags)) {
> +		if (page_referenced(page, 0, sc->mem_cgroup, &vm_flags)) {
>  			nr_rotated++;
>  			/*
>  			 * Identify referenced, file-backed active pages and

It looks good to me except PAGEREF_RECLAIM_CLEAN. 

I am glad to meet your this effort, again, Hannes. :)

-- 
Kind regards,
Minchan Kim


--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2010-02-23 15:03 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-02-22 19:49 mm: used-once mapped file page detection Johannes Weiner
2010-02-22 19:49 ` [patch 1/3] vmscan: factor out page reference checks Johannes Weiner
2010-02-22 20:27   ` Rik van Riel
2010-02-23 13:38   ` Minchan Kim
2010-02-23 14:21     ` Johannes Weiner
2010-02-23 14:31       ` Rik van Riel
2010-02-23 14:44       ` Minchan Kim
2010-02-23 15:40         ` Johannes Weiner
2010-02-23 16:04           ` Minchan Kim
2010-02-22 19:49 ` [patch 2/3] vmscan: drop page_mapping_inuse() Johannes Weiner
2010-02-22 20:28   ` Rik van Riel
2010-02-23 14:03   ` Minchan Kim
2010-02-23 14:32     ` Johannes Weiner
2010-02-23 14:48       ` Minchan Kim
2010-02-22 19:49 ` [patch 3/3] vmscan: detect mapped file pages used only once Johannes Weiner
2010-02-22 20:34   ` Rik van Riel
2010-02-23 15:03   ` Minchan Kim [this message]
2010-02-23 15:45     ` Johannes Weiner
2010-02-24 21:39 ` mm: used-once mapped file page detection Andrew Morton
2010-02-26 14:32   ` Johannes Weiner
2010-02-28 17:49     ` Rik van Riel
2010-02-28 20:36       ` Johannes Weiner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1266937393.2723.46.camel@barrios-desktop \
    --to=minchan.kim@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=hannes@cmpxchg.org \
    --cc=kosaki.motohiro@jp.fujitsu.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=riel@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox