From: David Woodhouse <dwmw2@infradead.org>
To: Theodore Tso <tytso@mit.edu>
Cc: Jeff Garzik <jeff@garzik.org>, Hugh Dickins <hugh@veritas.com>,
Andrew Morton <akpm@linux-foundation.org>,
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>,
mchan@broadcom.com, linux-kernel@vger.kernel.org,
linux-mm@kvack.org, netdev@vger.kernel.org
Subject: Re: [bug?] tg3: Failed to load firmware "tigon/tg3_tso.bin"
Date: Thu, 03 Jul 2008 19:56:02 +0100 [thread overview]
Message-ID: <1215111362.10393.651.camel@pmac.infradead.org> (raw)
In-Reply-To: <20080703173040.GB30506@mit.edu>
On Thu, 2008-07-03 at 13:30 -0400, Theodore Tso wrote:
> I don't think it's whining.
Neither is it an adequate review of the actual patch which was
submitted.
> If your patch introduces changes which
> cause people .config to break by default after upgrading to a newer
> kernel and doing "make oldconfig"
They had to 'make oldconfig' and then actually _choose_ to say 'no' to
an option which is fairly clearly documented, that they are the
relatively unusual position of wanting to have said 'yes' to. You're
getting into Aunt Tillie territory, when you complain about that.
Although it does make me wonder if it was better the way I had it
originally, with individual options like TIGON3_FIRMWARE_IN_KERNEL
attached to each driver, rather than a single FIRMWARE_IN_KERNEL option
which controls them all.
Perhaps one way to help Aunt Tillie would be to tweak Kbuild to look at
the MODULE_FIRMWARE() statements for in-kernel drivers, and to print a
warning when the build finishes: "Your static kernel image may require
the following firmware files, which are not included: ..."
It's wrong to change the CONFIG_FIRMWARE_IN_KERNEL default to 'Y',
because the _normal_ setting for that option _really_ should be 'N'.
Using request_firmware() satisfied from userspace is best practice these
days, and almost all recent drivers do it that way _unconditionally_
anyway.
What we're doing now is just cleaning up the older drivers which don't
use request_firmware(), to conform to what is now common practice. And
while we're retaining the _option_ to continue to build their firmware
into the static kernel image, it isn't recommended and really shouldn't
be the default configuration.
> Linus has ruled this way in the past, when he's gotten screwed by this
> sort of issue in the past, and he was justifiably annoyed.
I am content to let Linus decide on what the default for the
FIRMWARE_IN_KERNEL option will be. I am adamant that it _should_ be 'N',
but it's easy enough for Linus to overrule me with a one-line change.
In the meantime, it would be useful if Jeff would quit throwing his toys
out of the pram on that issue and actually review the _code_ changes. In
particular, are the reports correct that the device operates just fine
without the TSO firmware loaded? Should we change the request_firmware()
error path to just disable TSO and continue with the initialisation?
I can understand why he might not want to answer that if the answer is
affirmative, I suppose -- it detracts even _further_ from his already
rather dubious argument about 'breaking' the driver, if it'll actually
continue to work even when the firmware is completely absent. But it
would be nice to get an honest and straightforward review of the code
from _someone_ who actually knows the hardware.
> And if there are licensing religious fundamentalists who feel
> strongly about the firmware issue, then fine, they can change
> the .config.
Less of the ad hominem, please. Especially when it's so misdirected.
Updating these drivers to remove large blobs of static unswappable data
from the kernel, and having it provided from userspace on demand as
modern Linux drivers do, is a perfectly sensible technical goal all on
its own.
And given the GPL's explicit provisions with regard to collective works
there are also entirely reasonable, non-"fundamentalist" grounds for
believing that it _may_ pose a licensing problem, and for wanting to err
on the side of caution in that respect too.
Fedora is almost certain to ship with CONFIG_FIRMWARE_IN_KERNEL=n, and
I'd be very surprised if Debian and other major distributions don't
follow suit. It is the sensible, pragmatic, technically sound choice.
> But the default should be to avoid users from having broken kernels,
> and a number of (quite clueful) users have already demonstrated that
> without setting CONFIG_FIRMWARE_IN_KERNEL=y as the default, your
> patches cause breakage.
By this argument, shouldn't we include images in the static kernel for
_all_ drivers which currently use request_firmware()? Otherwise, it's
possible for the user to 'break' them, right?
--
dwmw2
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2008-07-03 18:56 UTC|newest]
Thread overview: 168+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-03 9:02 2.6.26-rc8-mm1 Andrew Morton
2008-07-03 11:22 ` [BUILD-FAILURE] 2.6.26-rc8-mm1 - build failure at drivers/char/hvc_rtas.c Kamalesh Babulal
2008-07-03 11:59 ` [bug?] tg3: Failed to load firmware "tigon/tg3_tso.bin" KOSAKI Motohiro
2008-07-03 12:21 ` Jeff Garzik
2008-07-03 13:04 ` Hugh Dickins
2008-07-03 13:11 ` Jeff Garzik
2008-07-03 13:33 ` David Woodhouse
2008-07-03 13:38 ` Jeff Garzik
2008-07-03 13:52 ` David Woodhouse
2008-07-03 17:30 ` Theodore Tso
2008-07-03 18:56 ` David Woodhouse [this message]
2008-07-03 19:31 ` Valdis.Kletnieks
2008-07-03 19:49 ` David Woodhouse
2008-07-03 20:52 ` Rafael J. Wysocki
2008-07-03 21:03 ` Jeff Garzik
2008-07-03 21:33 ` David Woodhouse
2008-07-03 21:42 ` Rafael J. Wysocki
2008-07-03 21:43 ` David Woodhouse
2008-07-03 21:52 ` Rafael J. Wysocki
2008-07-03 21:54 ` David Woodhouse
2008-07-03 22:27 ` Rafael J. Wysocki
2008-07-03 22:22 ` Jeff Garzik
2008-07-03 22:25 ` Alan Cox
2008-07-03 23:14 ` Jeff Garzik
2008-07-03 23:02 ` Alan Cox
2008-07-04 2:31 ` Mikael Pettersson
2008-07-03 23:21 ` David Miller, David Woodhouse
2008-07-04 0:18 ` Theodore Tso
2008-07-04 1:09 ` David Woodhouse
2008-07-04 1:47 ` Theodore Tso
2008-07-04 0:24 ` David Woodhouse
2008-07-04 1:28 ` Grant Coady
2008-07-04 2:42 ` david
2008-07-04 10:07 ` David Woodhouse
2008-07-04 10:09 ` Andi Kleen
2008-07-04 13:10 ` David Woodhouse
2008-07-04 13:15 ` Jeff Garzik
2008-07-04 13:27 ` David Woodhouse
2008-07-04 13:39 ` Jeff Garzik
2008-07-04 13:27 ` Alan Cox
2008-07-04 13:48 ` David Woodhouse
2008-07-04 14:06 ` Jeff Garzik
2008-07-04 20:43 ` David Miller, Alan Cox
2008-07-04 21:04 ` Alan Cox
2008-07-06 20:17 ` david
2008-07-06 20:27 ` David Woodhouse
2008-07-06 20:51 ` Jeff Garzik
2008-07-06 20:52 ` david
2008-07-06 20:56 ` David Woodhouse
2008-07-06 21:03 ` david
2008-07-06 21:38 ` Jeff Garzik
2008-07-06 22:10 ` David Woodhouse
2008-07-06 23:22 ` Jeff Garzik
2008-07-05 6:05 ` Jeff Garzik
2008-07-07 17:52 ` Rick Jones
2008-07-04 13:46 ` David Woodhouse
2008-07-04 14:07 ` Jeff Garzik
2008-07-04 14:38 ` Alan Cox
2008-07-06 23:40 ` Jeff Garzik
2008-07-07 15:53 ` Alan Cox
2008-07-07 17:24 ` Jeff Garzik
2008-07-07 18:13 ` Alan Cox
2008-07-07 18:57 ` Jeff Garzik
2008-07-07 18:30 ` Alan Cox
2008-07-07 19:16 ` Jeff Garzik
2008-07-07 18:45 ` Alan Cox
2008-07-07 19:48 ` Jeff Garzik
2008-07-07 20:48 ` David Miller, Alan Cox
2008-07-07 20:42 ` Alan Cox
2008-07-07 21:45 ` David Miller, Alan Cox
2008-07-07 21:14 ` Alan Cox
2008-07-07 21:58 ` David Miller, Alan Cox
2008-07-08 6:36 ` Alan Cox
2008-07-08 8:57 ` David Miller, Alan Cox
2008-07-04 14:30 ` Theodore Tso
2008-07-04 14:37 ` David Woodhouse
2008-07-04 18:01 ` David Woodhouse
2008-07-04 20:28 ` Sam Ravnborg
2008-07-05 4:35 ` Jeff Garzik
2008-07-04 20:39 ` David Miller, Jeff Garzik
2008-07-04 14:10 ` Theodore Tso
2008-07-04 14:23 ` Takashi Iwai
2008-07-04 14:39 ` Hannes Reinecke
2008-07-04 14:42 ` David Woodhouse
2008-07-04 21:34 ` Grant Coady
2008-07-04 22:08 ` David Woodhouse
2008-07-04 23:13 ` Olivier Galibert
2008-07-04 23:58 ` Henrique de Moraes Holschuh
2008-07-05 0:51 ` Trent Piepho
2008-07-05 3:52 ` Henrique de Moraes Holschuh
2008-07-05 6:01 ` Bill Fink
2008-07-05 13:08 ` Henrique de Moraes Holschuh
2008-07-05 4:10 ` Jeff Garzik
2008-07-05 7:41 ` Takashi Iwai
2008-07-05 8:50 ` David Woodhouse
2008-07-05 10:53 ` Olivier Galibert
2008-07-05 11:22 ` Andi Kleen
2008-07-05 12:02 ` Olivier Galibert
2008-07-05 12:09 ` Andi Kleen
2008-07-05 12:16 ` David Woodhouse
2008-07-05 12:23 ` Andi Kleen
2008-07-05 12:42 ` David Woodhouse
2008-07-05 13:57 ` Andi Kleen
2008-07-05 14:44 ` Olivier Galibert
2008-07-05 15:10 ` David Woodhouse
2008-07-05 17:13 ` Christoph Hellwig
2008-07-05 20:55 ` David Woodhouse
2008-07-06 10:02 ` Christoph Hellwig
2008-07-06 10:55 ` David Woodhouse
2008-07-06 11:50 ` Andi Kleen
2008-07-06 12:22 ` David Woodhouse
2008-07-04 14:44 ` Takashi Iwai
2008-07-04 14:24 ` maximilian attems
2008-07-04 14:36 ` Theodore Tso
2008-07-05 10:26 ` maximilian attems
2008-07-04 14:31 ` David Woodhouse
2008-07-04 20:37 ` David Miller, David Woodhouse
2008-07-04 20:42 ` Arjan van de Ven
2008-07-04 20:43 ` David Woodhouse
2008-07-04 20:52 ` David Miller, David Woodhouse
2008-07-04 21:05 ` David Woodhouse
2008-07-05 4:05 ` Valdis.Kletnieks
2008-07-04 20:51 ` David Miller, Arjan van de Ven
2008-07-04 20:59 ` Arjan van de Ven
2008-07-04 21:12 ` David Woodhouse
2008-07-04 21:10 ` Alan Cox
2008-07-04 20:53 ` David Woodhouse
2008-07-05 4:04 ` Jeff Garzik
2008-07-04 13:42 ` Andi Kleen
2008-07-03 20:34 ` David Miller, Jeff Garzik
2008-07-03 20:54 ` David Woodhouse
2008-07-09 20:43 ` Alexandre Oliva
2008-07-04 11:06 ` Takashi Iwai
2008-07-04 13:17 ` David Woodhouse
2008-07-04 13:26 ` Takashi Iwai
2008-07-04 13:28 ` David Woodhouse
2008-07-04 13:42 ` Jeff Garzik
2008-07-04 13:45 ` David Woodhouse
2008-07-04 14:10 ` Jeff Garzik
2008-07-04 14:13 ` David Woodhouse
2008-07-05 6:14 ` Jeff Garzik
2008-07-04 13:28 ` Jeff Garzik
2008-07-03 16:10 ` Chuck Lever
2008-07-03 14:26 ` WARNING at acpi/.../utmisc.c:1043 [Was: 2.6.26-rc8-mm1] Jiri Slaby
2008-07-03 14:38 ` Andi Kleen
2008-07-03 15:24 ` Jiri Slaby
2008-07-03 23:35 ` 2.6.26-rc8-mm1--No e100 :( logs say missing formware Grant Coady
2008-07-04 0:40 ` Andrew Morton
2008-07-03 23:42 ` 2.6.26-rc8-mm1--No e100 :( logs say missing firmware Grant Coady
2008-07-04 2:48 ` Question: split-lur // Re: 2.6.26-rc8-mm1 KAMEZAWA Hiroyuki
2008-07-04 9:02 ` memcg: lru scan fix (Was: 2.6.26-rc8-mm1 KAMEZAWA Hiroyuki
2008-07-04 19:16 ` Rik van Riel
2008-07-04 19:24 ` Andrew Morton
2008-07-05 3:59 ` KAMEZAWA Hiroyuki
2008-07-04 9:09 ` [PATCH] memcg: handle shmem's swap cache (Was 2.6.26-rc8-mm1 KAMEZAWA Hiroyuki
2008-07-05 5:41 ` Balbir Singh
2008-07-05 6:11 ` KAMEZAWA Hiroyuki
2008-07-05 6:49 ` Balbir Singh
2008-07-05 8:16 ` kamezawa.hiroyu
2008-07-04 22:49 ` 2.6.26-rc8-mm1: unable to mount nfs shares Mariusz Kozlowski
2008-07-04 23:07 ` Andrew Morton
2008-07-08 14:42 ` [BUG] 2.6.26-rc8-mm1 - sleeping function called from invalid context at include/linux/pagemap.h:291 Kamalesh Babulal
2008-07-12 7:15 ` KOSAKI Motohiro
2008-07-09 21:33 ` 2.6.26-rc8-mm1 - Missing AC97 power save Kconfig? Zan Lynx
2008-07-09 22:05 ` Randy Dunlap
2008-07-09 22:34 ` Zan Lynx
2008-07-05 5:49 [bug?] tg3: Failed to load firmware "tigon/tg3_tso.bin" Jaswinder Singh
2008-07-05 6:37 Jaswinder Singh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1215111362.10393.651.camel@pmac.infradead.org \
--to=dwmw2@infradead.org \
--cc=akpm@linux-foundation.org \
--cc=hugh@veritas.com \
--cc=jeff@garzik.org \
--cc=kosaki.motohiro@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mchan@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox