From: Anton Salikhmetov <salikhmetov@gmail.com>
From: Anton Salikhmetov <salikhmetov@gmail.com>
To: linux-mm@kvack.org
Cc: jakob@unthought.net, linux-kernel@vger.kernel.org,
Valdis.Kletnieks@vt.edu, riel@redhat.com, ksm@42.dk,
staubach@redhat.com, jesper.juhl@gmail.com
Subject: [PATCH 1/2][RFC][BUG] msync: massive code cleanup of sys_msync()
Date: Fri, 11 Jan 2008 03:38:42 +0300 [thread overview]
Message-ID: <1200011922.19293.92.camel@codedot> (raw)
In-Reply-To: <1200006638.19293.42.camel@codedot>
The patch contains substantial code cleanup of the sys_msync() function:
1) consolidated error check for function parameters;
2) using the PAGE_ALIGN() macro instead of "manual" alignment;
3) improved readability of the loop traversing the process memory regions.
Signed-off-by: Anton Salikhmetov <salikhmetov@gmail.com>
---
diff --git a/mm/msync.c b/mm/msync.c
index 144a757..e788f7b 100644
--- a/mm/msync.c
+++ b/mm/msync.c
@@ -1,24 +1,25 @@
/*
* linux/mm/msync.c
*
+ * The msync() system call.
* Copyright (C) 1994-1999 Linus Torvalds
+ *
+ * Substantial code cleanup.
+ * Copyright (C) 2008 Anton Salikhmetov <salikhmetov@gmail.com>
*/
-/*
- * The msync() system call.
- */
+#include <linux/file.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/mman.h>
-#include <linux/file.h>
-#include <linux/syscalls.h>
#include <linux/sched.h>
+#include <linux/syscalls.h>
/*
* MS_SYNC syncs the entire file - including mappings.
*
* MS_ASYNC does not start I/O (it used to, up to 2.5.67).
- * Nor does it marks the relevant pages dirty (it used to up to 2.6.17).
+ * Nor does it mark the relevant pages dirty (it used to up to 2.6.17).
* Now it doesn't do anything, since dirty pages are properly tracked.
*
* The application may now run fsync() to
@@ -33,71 +34,60 @@ asmlinkage long sys_msync(unsigned long start, size_t len, int flags)
unsigned long end;
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
- int unmapped_error = 0;
- int error = -EINVAL;
+ int error = 0, unmapped_error = 0;
+
+ if ((flags & ~(MS_ASYNC | MS_INVALIDATE | MS_SYNC)) ||
+ (start & ~PAGE_MASK) ||
+ ((flags & MS_ASYNC) && (flags & MS_SYNC)))
+ return -EINVAL;
- if (flags & ~(MS_ASYNC | MS_INVALIDATE | MS_SYNC))
- goto out;
- if (start & ~PAGE_MASK)
- goto out;
- if ((flags & MS_ASYNC) && (flags & MS_SYNC))
- goto out;
- error = -ENOMEM;
- len = (len + ~PAGE_MASK) & PAGE_MASK;
+ len = PAGE_ALIGN(len);
end = start + len;
if (end < start)
- goto out;
- error = 0;
+ return -ENOMEM;
if (end == start)
- goto out;
+ return 0;
+
/*
* If the interval [start,end) covers some unmapped address ranges,
* just ignore them, but return -ENOMEM at the end.
*/
down_read(&mm->mmap_sem);
vma = find_vma(mm, start);
- for (;;) {
+ do {
struct file *file;
- /* Still start < end. */
- error = -ENOMEM;
- if (!vma)
- goto out_unlock;
- /* Here start < vma->vm_end. */
+ if (!vma) {
+ error = -ENOMEM;
+ break;
+ }
if (start < vma->vm_start) {
start = vma->vm_start;
- if (start >= end)
- goto out_unlock;
+ if (start >= end) {
+ error = -ENOMEM;
+ break;
+ }
unmapped_error = -ENOMEM;
}
- /* Here vma->vm_start <= start < vma->vm_end. */
- if ((flags & MS_INVALIDATE) &&
- (vma->vm_flags & VM_LOCKED)) {
+ if ((flags & MS_INVALIDATE) && (vma->vm_flags & VM_LOCKED)) {
error = -EBUSY;
- goto out_unlock;
+ break;
}
file = vma->vm_file;
- start = vma->vm_end;
- if ((flags & MS_SYNC) && file &&
- (vma->vm_flags & VM_SHARED)) {
+ if ((flags & MS_SYNC) && file && (vma->vm_flags & VM_SHARED)) {
get_file(file);
up_read(&mm->mmap_sem);
error = do_fsync(file, 0);
fput(file);
- if (error || start >= end)
- goto out;
+ if (error)
+ return error;
down_read(&mm->mmap_sem);
- vma = find_vma(mm, start);
- } else {
- if (start >= end) {
- error = 0;
- goto out_unlock;
- }
- vma = vma->vm_next;
}
- }
-out_unlock:
+
+ start = vma->vm_end;
+ vma = vma->vm_next;
+ } while (start < end);
up_read(&mm->mmap_sem);
-out:
+
return error ? : unmapped_error;
}
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next parent reply other threads:[~2008-01-11 0:38 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1200006638.19293.42.camel@codedot>
2008-01-11 0:38 ` Anton Salikhmetov, Anton Salikhmetov [this message]
2008-01-11 15:55 ` Rik van Riel
2008-01-11 0:44 ` [PATCH 2/2][RFC][BUG] msync: updating ctime and mtime at syncing Anton Salikhmetov, Anton Salikhmetov
2008-01-11 18:55 ` Peter Staubach
2008-01-11 19:29 ` Anton Salikhmetov
2008-01-11 18:59 ` Peter Staubach
2008-01-11 21:40 ` Anton Salikhmetov
2008-01-11 21:59 ` Peter Staubach
2008-01-11 22:15 ` Anton Salikhmetov
2008-01-12 2:24 ` Anton Salikhmetov
2008-01-12 9:36 ` Peter Zijlstra
2008-01-12 9:40 ` Peter Zijlstra
2008-01-12 12:38 ` Anton Salikhmetov
2008-01-12 13:09 ` Peter Zijlstra
2008-01-12 13:51 ` Anton Salikhmetov
2008-01-12 12:17 ` Anton Salikhmetov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1200011922.19293.92.camel@codedot \
--to=salikhmetov@gmail.com \
--cc=Valdis.Kletnieks@vt.edu \
--cc=jakob@unthought.net \
--cc=jesper.juhl@gmail.com \
--cc=ksm@42.dk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=riel@redhat.com \
--cc=staubach@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox