From: Badari Pulavarty <pbadari@us.ibm.com>
To: Jeff Dike <jdike@addtoit.com>
Cc: Hugh Dickins <hugh@veritas.com>,
akpm@osdl.org, andrea@suse.de, dvhltc@us.ibm.com,
linux-mm <linux-mm@kvack.org>,
Blaisorblade <blaisorblade@yahoo.it>
Subject: Re: [RFC] madvise(MADV_TRUNCATE)
Date: Mon, 31 Oct 2005 08:34:39 -0800 [thread overview]
Message-ID: <1130776479.24503.3.camel@localhost.localdomain> (raw)
In-Reply-To: <20051029025119.GA14998@ccure.user-mode-linux.org>
On Fri, 2005-10-28 at 22:51 -0400, Jeff Dike wrote:
> On Fri, Oct 28, 2005 at 05:03:21PM -0700, Badari Pulavarty wrote:
> > Here is the update on the patch.
> >
> > I found few bugs in my shmem_truncate_range() (surprise!!)
> > - BUG_ON(subdir->nr_swapped > offset);
> > - freeing up the "subdir" while it has some more entries
> > swapped.
> >
> > I wrote some tests to force swapping and working out the bugs.
> > I haven't tried your test yet, since its kind of intimidating :(
>
> Well, then send me the patch since I don't find this the least bit
> intimidating :-)
Jeff,
I tried your testcase again (tried to remove 8K). I see nothing
wrong from madvise() side - but after removing all commands
hang in UML. Few uml processes keep spinning. Does these mean
anything to you. I can't seem to find out what wrong with my
code.
(BTW, I wrote a testcase to release few pages and then go back
and touch those pages again - I don't see any problem).
Please let me know.
Thanks,
Badari
top - 03:36:09 up 8 min, 3 users, load average: 1.26, 0.70, 0.33
Tasks: 70 total, 3 running, 57 sleeping, 10 stopped, 0 zombie
Cpu(s): 8.8% us, 41.2% sy, 0.0% ni, 49.9% id, 0.0% wa, 0.0% hi,
0.0% si
Mem: 4042308k total, 283296k used, 3759012k free, 9728k buffers
Swap: 1052648k total, 0k used, 1052648k free, 149052k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
11826 root 16 0 193m 51m 51m R 62.6 1.3 1:01.44 linux
11834 root 15 0 504 456 440 R 37.3 0.0 0:35.70 linux
1 root 16 0 720 260 216 S 0.0 0.0 0:00.57 init
2 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0
sysrq-t output:
linux S 0000000000000001 0 11826 10995 11832
(NOTLB)
0000000000000001 0000000000000000 0000000000000001 0000000000000006
ffffffff8062e480 ffffffffffffffef ffffffff80404544
0000000000000010
0000000000000202 ffff810111e8dd48
Call Trace:<ffffffff80404544>{_write_lock_irqsave+132}
<ffffffff80404599>{_write_lock_irq+9}
<ffffffff8013a522>{do_wait+610}
<ffffffff80132430>{default_wake_function+0}
<ffffffff80132430>{default_wake_function+0}
<ffffffff8013241b>{try_to_wake_up+1083}
<ffffffff8013b05a>{sys_wait4+42}
<ffffffff80159771>{compat_sys_wait4+49}
<ffffffff80132460>{wake_up_process+16}
<ffffffff80111a05>{sys_ptrace+2261}
<ffffffff8012ea5f>{sys32_ptrace+111}
<ffffffff80124efb>{sys32_waitpid+11}
<ffffffff801235eb>{sysenter_do_call+27}
linux t ffff810120ee0100 0 11834 11826 12082
(NOTLB)
ffff810109fdbdb8 0000000000000082 0000000000000001 0000000000000046
ffff810109fdbd08 ffffffff801331e2 0000000000000000
ffff81011b01a600
ffff81011b01ae08 ffff8101234a0ec0
Call Trace:<ffffffff801331e2>{__wake_up_sync+98}
<ffffffff801422f2>{recalc_sigpending+18}
<ffffffff801433a5>{__dequeue_signal+501} <ffffffff80144939>{ptrace_stop
+313}
<ffffffff80145997>{get_signal_to_deliver+407}
<ffffffff8010d21d>{do_signal+125}
<ffffffff80406480>{do_page_fault+2176}
<ffffffff8012e2eb>{restore_i387_ia32+75}
<ffffffff80129ba1>{ia32_restore_sigcontext+129}
<ffffffff80129cd1>{ia32_restore_sigcontext+433}
<ffffffff8010d890>{do_notify_resume+48}
<ffffffff8010e036>{int_signal+18}
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2005-10-31 16:35 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-26 22:49 Badari Pulavarty
2005-10-27 8:38 ` Andi Kleen
2005-10-27 13:17 ` Andrea Arcangeli
2005-10-27 15:00 ` Badari Pulavarty
2005-10-27 15:11 ` Andrea Arcangeli
2005-10-27 18:20 ` Andrew Morton
2005-10-27 18:35 ` Badari Pulavarty
2005-10-27 18:50 ` Andrew Morton
2005-10-27 19:40 ` Gerrit Huizenga
2005-10-27 19:56 ` Andi Kleen
2005-10-27 23:21 ` Darren Hart
2005-10-27 20:05 ` Theodore Ts'o
2005-10-27 20:16 ` Andrea Arcangeli
2005-10-28 1:42 ` Badari Pulavarty
2005-10-28 16:33 ` Theodore Ts'o
2005-10-27 20:22 ` Jeff Dike
2005-10-27 20:04 ` Andrea Arcangeli
2005-10-27 20:50 ` Andrew Morton
2005-10-27 21:37 ` Andrea Arcangeli
2005-10-27 22:23 ` Andrew Morton
2005-10-27 23:05 ` Badari Pulavarty
2005-10-27 23:16 ` Andrew Morton
2005-10-27 23:33 ` Peter Chubb
2005-10-28 0:22 ` Andrea Arcangeli
2005-10-28 0:32 ` Andrew Morton
2005-10-28 1:10 ` Andrea Arcangeli
2005-10-28 1:27 ` Badari Pulavarty
2005-10-28 2:00 ` Andrew Morton
2005-10-27 22:32 ` Badari Pulavarty
2005-10-27 23:28 ` Peter Chubb
2005-10-27 23:49 ` Andrew Morton
2005-10-27 23:56 ` Nathan Scott
2005-10-28 0:15 ` Andrea Arcangeli
2005-10-27 23:59 ` Peter Chubb
2005-10-28 3:46 ` Jeff Dike
2005-10-28 11:03 ` Blaisorblade
2005-10-28 13:29 ` Andrea Arcangeli
2005-10-28 16:56 ` Blaisorblade
2005-10-28 16:16 ` Badari Pulavarty
2005-10-28 18:40 ` Blaisorblade
2005-10-28 18:56 ` Badari Pulavarty
2005-10-29 0:35 ` Badari Pulavarty
2005-10-28 16:19 ` Badari Pulavarty
2005-10-28 17:10 ` Blaisorblade
2005-10-28 18:28 ` Jeff Dike
2005-10-28 18:44 ` Blaisorblade
2005-10-28 18:42 ` Jeff Dike
2005-10-28 18:54 ` Badari Pulavarty
2005-10-29 0:03 ` Badari Pulavarty
2005-10-29 2:51 ` Jeff Dike
2005-10-31 16:34 ` Badari Pulavarty [this message]
2005-10-31 19:15 ` Badari Pulavarty
2005-10-31 19:49 ` [RFC][PATCH] madvise(MADV_TRUNCATE) Badari Pulavarty
2005-11-01 0:05 ` Jeff Dike
2005-11-02 1:15 ` [PATCH] 2.6.14 patch for supporting madvise(MADV_FREE) Badari Pulavarty
2005-11-02 1:43 ` Andrea Arcangeli
2005-11-02 15:49 ` Badari Pulavarty
2005-11-02 16:12 ` [PATCH] 2.6.14 patch for supporting madvise(MADV_REMOVE) Badari Pulavarty
2005-11-02 19:54 ` New bug in patch and existing Linux code - race with install_page() (was: Re: [PATCH] 2.6.14 patch for supporting madvise(MADV_REMOVE)) Blaisorblade
2005-11-02 20:12 ` Hugh Dickins
2005-11-02 20:45 ` Hugh Dickins
2005-11-02 21:36 ` Badari Pulavarty
2005-11-02 21:55 ` Hugh Dickins
2005-11-02 22:02 ` Badari Pulavarty
2005-11-12 0:25 ` [PATCH] 2.6.14 patch for supporting madvise(MADV_REMOVE) Andrew Morton
2005-11-12 0:34 ` Badari Pulavarty
2005-11-12 1:43 ` Andrew Morton
2005-11-12 4:41 ` Badari Pulavarty
2006-01-16 13:06 ` differences between MADV_FREE and MADV_DONTNEED Andrea Arcangeli
2006-01-16 16:02 ` Suleiman Souhlal
2006-01-16 16:28 ` Andrea Arcangeli
2006-01-16 17:03 ` Suleiman Souhlal
2006-01-16 17:24 ` Andrea Arcangeli
2006-01-16 21:43 ` Eric W. Biederman
2006-01-17 0:24 ` Suleiman Souhlal
2006-01-17 1:04 ` Nicholas Miell
2006-01-17 12:43 ` Christoph Hellwig
2006-01-17 18:23 ` Eric W. Biederman
2006-01-17 22:55 ` Nicholas Miell
2007-03-01 18:11 ` Samuel Thibault
2006-01-17 19:06 ` Badari Pulavarty
2006-01-17 1:06 ` Blaisorblade
2006-01-17 1:33 ` Andrea Arcangeli
2005-11-12 0:34 ` [PATCH] 2.6.14 patch for supporting madvise(MADV_REMOVE) Andrew Morton
2005-10-28 17:55 ` [RFC] madvise(MADV_TRUNCATE) Blaisorblade
2005-10-28 21:23 ` Theodore Ts'o
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1130776479.24503.3.camel@localhost.localdomain \
--to=pbadari@us.ibm.com \
--cc=akpm@osdl.org \
--cc=andrea@suse.de \
--cc=blaisorblade@yahoo.it \
--cc=dvhltc@us.ibm.com \
--cc=hugh@veritas.com \
--cc=jdike@addtoit.com \
--cc=linux-mm@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox