From: Dev Jain <dev.jain@arm.com>
To: Barry Song <baohua@kernel.org>
Cc: linux-mm@kvack.org, linux-arm-kernel@lists.infradead.org,
catalin.marinas@arm.com, will@kernel.org,
akpm@linux-foundation.org, urezki@gmail.com,
linux-kernel@vger.kernel.org, anshuman.khandual@arm.com,
ryan.roberts@arm.com, ajd@linux.ibm.com, rppt@kernel.org,
david@kernel.org, Xueyuan.chen21@gmail.com
Subject: Re: [RFC PATCH 5/8] mm/vmalloc: map contiguous pages in batches for vmap() if possible
Date: Wed, 8 Apr 2026 16:52:42 +0530 [thread overview]
Message-ID: <0805d765-31af-49a0-acb4-8a72843f1213@arm.com> (raw)
In-Reply-To: <CAGsJ_4xCtFe=5ofj4FW6cqu-fgR+K9BM7FPZRdAWOGP3YKtNzQ@mail.gmail.com>
On 08/04/26 10:42 am, Barry Song wrote:
> On Wed, Apr 8, 2026 at 12:20 PM Dev Jain <dev.jain@arm.com> wrote:
>>
>>
>>
>> On 08/04/26 8:21 am, Barry Song (Xiaomi) wrote:
>>> In many cases, the pages passed to vmap() may include high-order
>>> pages allocated with __GFP_COMP flags. For example, the systemheap
>>> often allocates pages in descending order: order 8, then 4, then 0.
>>> Currently, vmap() iterates over every page individually—even pages
>>> inside a high-order block are handled one by one.
>>>
>>> This patch detects high-order pages and maps them as a single
>>> contiguous block whenever possible.
>>>
>>> An alternative would be to implement a new API, vmap_sg(), but that
>>> change seems to be large in scope.
>>>
>>> Signed-off-by: Barry Song (Xiaomi) <baohua@kernel.org>
>>> ---
>>
>> Coincidentally, I was working on the same thing :)
>
> Interesting, thanks — at least I’ve got one good reviewer :-)
>
>>
>> We have a usecase regarding Arm TRBE and SPE aux buffers.
>>
>> I'll take a look at your patches later, but my implementation is the
>
> Yes. Please.
>
>
>> following, if you have any comments. I have squashed the patches into
>> a single diff.
>
> Thanks very much, Dev. What you’ve done is quite similar to
> patches 5/8 and 6/8, although the code differs somewhat.
>
>>
>>
>>
>> From ccb9670a52b7f50b1f1e07b579a1316f76b84811 Mon Sep 17 00:00:00 2001
>> From: Dev Jain <dev.jain@arm.com>
>> Date: Thu, 26 Feb 2026 16:21:29 +0530
>> Subject: [PATCH] arm64/perf: map AUX buffer with large pages
>>
>> Signed-off-by: Dev Jain <dev.jain@arm.com>
>> ---
>> .../hwtracing/coresight/coresight-etm-perf.c | 3 +-
>> drivers/hwtracing/coresight/coresight-trbe.c | 3 +-
>> drivers/perf/arm_spe_pmu.c | 5 +-
>> mm/vmalloc.c | 86 ++++++++++++++++---
>> 4 files changed, 79 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
>> index 72017dcc3b7f1..e90a430af86bb 100644
>> --- a/drivers/hwtracing/coresight/coresight-etm-perf.c
>> +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
>> @@ -984,7 +984,8 @@ int __init etm_perf_init(void)
>>
>> etm_pmu.capabilities = (PERF_PMU_CAP_EXCLUSIVE |
>> PERF_PMU_CAP_ITRACE |
>> - PERF_PMU_CAP_AUX_PAUSE);
>> + PERF_PMU_CAP_AUX_PAUSE |
>> + PERF_PMU_CAP_AUX_PREFER_LARGE);
>>
>> etm_pmu.attr_groups = etm_pmu_attr_groups;
>> etm_pmu.task_ctx_nr = perf_sw_context;
>> diff --git a/drivers/hwtracing/coresight/coresight-trbe.c b/drivers/hwtracing/coresight/coresight-trbe.c
>> index 1511f8eb95afb..74e6ad891e236 100644
>> --- a/drivers/hwtracing/coresight/coresight-trbe.c
>> +++ b/drivers/hwtracing/coresight/coresight-trbe.c
>> @@ -760,7 +760,8 @@ static void *arm_trbe_alloc_buffer(struct coresight_device *csdev,
>> for (i = 0; i < nr_pages; i++)
>> pglist[i] = virt_to_page(pages[i]);
>>
>> - buf->trbe_base = (unsigned long)vmap(pglist, nr_pages, VM_MAP, PAGE_KERNEL);
>> + buf->trbe_base = (unsigned long)vmap(pglist, nr_pages,
>> + VM_MAP | VM_ALLOW_HUGE_VMAP, PAGE_KERNEL);
>> if (!buf->trbe_base) {
>> kfree(pglist);
>> kfree(buf);
>> diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c
>> index dbd0da1116390..90c349fd66b2c 100644
>> --- a/drivers/perf/arm_spe_pmu.c
>> +++ b/drivers/perf/arm_spe_pmu.c
>> @@ -1027,7 +1027,7 @@ static void *arm_spe_pmu_setup_aux(struct perf_event *event, void **pages,
>> for (i = 0; i < nr_pages; ++i)
>> pglist[i] = virt_to_page(pages[i]);
>>
>> - buf->base = vmap(pglist, nr_pages, VM_MAP, PAGE_KERNEL);
>> + buf->base = vmap(pglist, nr_pages, VM_MAP | VM_ALLOW_HUGE_VMAP, PAGE_KERNEL);
>> if (!buf->base)
>> goto out_free_pglist;
>>
>> @@ -1064,7 +1064,8 @@ static int arm_spe_pmu_perf_init(struct arm_spe_pmu *spe_pmu)
>> spe_pmu->pmu = (struct pmu) {
>> .module = THIS_MODULE,
>> .parent = &spe_pmu->pdev->dev,
>> - .capabilities = PERF_PMU_CAP_EXCLUSIVE | PERF_PMU_CAP_ITRACE,
>> + .capabilities = PERF_PMU_CAP_EXCLUSIVE | PERF_PMU_CAP_ITRACE |
>> + PERF_PMU_CAP_AUX_PREFER_LARGE,
>> .attr_groups = arm_spe_pmu_attr_groups,
>> /*
>> * We hitch a ride on the software context here, so that
>> diff --git a/mm/vmalloc.c b/mm/vmalloc.c
>> index 61caa55a44027..8482463d41203 100644
>> --- a/mm/vmalloc.c
>> +++ b/mm/vmalloc.c
>> @@ -660,14 +660,14 @@ int __vmap_pages_range_noflush(unsigned long addr, unsigned long end,
>> pgprot_t prot, struct page **pages, unsigned int page_shift)
>> {
>> unsigned int i, nr = (end - addr) >> PAGE_SHIFT;
>> -
>> + unsigned long step = 1UL << (page_shift - PAGE_SHIFT);
>> WARN_ON(page_shift < PAGE_SHIFT);
>>
>> if (!IS_ENABLED(CONFIG_HAVE_ARCH_HUGE_VMALLOC) ||
>> page_shift == PAGE_SHIFT)
>> return vmap_small_pages_range_noflush(addr, end, prot, pages);
>>
>> - for (i = 0; i < nr; i += 1U << (page_shift - PAGE_SHIFT)) {
>> + for (i = 0; i < ALIGN_DOWN(nr, step); i += step) {
>> int err;
>>
>> err = vmap_range_noflush(addr, addr + (1UL << page_shift),
>> @@ -678,8 +678,9 @@ int __vmap_pages_range_noflush(unsigned long addr, unsigned long end,
>>
>> addr += 1UL << page_shift;
>> }
>> -
>> - return 0;
>> + if (IS_ALIGNED(nr, step))
>> + return 0;
>> + return vmap_small_pages_range_noflush(addr, end, prot, pages + i);
>> }
>>
>> int vmap_pages_range_noflush(unsigned long addr, unsigned long end,
>> @@ -3514,6 +3515,50 @@ void vunmap(const void *addr)
>> }
>> EXPORT_SYMBOL(vunmap);
>>
>> +static inline unsigned int vm_shift(pgprot_t prot, unsigned long size)
>> +{
>> + if (arch_vmap_pmd_supported(prot) && size >= PMD_SIZE)
>> + return PMD_SHIFT;
>> +
>> + return arch_vmap_pte_supported_shift(size);
>> +}
>> +
>> +static inline int __vmap_huge(struct page **pages, pgprot_t prot,
>> + unsigned long addr, unsigned int count)
>> +{
>> + unsigned int i = 0;
>> + unsigned int shift;
>> + unsigned long nr;
>> +
>> + while (i < count) {
>> + nr = num_pages_contiguous(pages + i, count - i);
>> + shift = vm_shift(prot, nr << PAGE_SHIFT);
>> + if (vmap_pages_range(addr, addr + (nr << PAGE_SHIFT),
>> + pgprot_nx(prot), pages + i, shift) < 0) {
>> + return 1;
>> + }
>
> One observation on my side is that the performance gain is somewhat
> offset by page table zigzagging caused by what you are doing here -
> iterating each mem segment by vmap_pages_range() .
I recall having observed this problem half an year back, and I wrote
code similar to what you did with patch 3 - but I didn't observe any
performance improvement. I think that was because I was testing
vmalloc - most of the cost there lies in the page allocation.
So looks like this indeed is a benefit for vmap.
>
> In patch 3/8, I enhanced vmap_small_pages_range_noflush() to
> avoid repeated pgd → p4d → pud → pmd → pte traversals for page
> shifts other than PAGE_SHIFT. This improves performance for
> vmalloc as well as vmap(). Then, in patch 7/8, I adopt the new
> vmap_small_pages_range_noflush() and eliminate the iteration.
>
>> + i += nr;
>> + addr += (nr << PAGE_SHIFT);
>> + }
>> + return 0;
>> +}
>> +
>> +static unsigned long max_contiguous_stride_order(struct page **pages,
>> + pgprot_t prot, unsigned int count)
>> +{
>> + unsigned long max_shift = PAGE_SHIFT;
>> + unsigned int i = 0;
>> +
>> + while (i < count) {
>> + unsigned long nr = num_pages_contiguous(pages + i, count - i);
>> + unsigned long shift = vm_shift(prot, nr << PAGE_SHIFT);
>> +
>> + max_shift = max(max_shift, shift);
>> + i += nr;
>> + }
>> + return max_shift;
>> +}
>> +
>> /**
>> * vmap - map an array of pages into virtually contiguous space
>> * @pages: array of page pointers
>> @@ -3552,15 +3597,32 @@ void *vmap(struct page **pages, unsigned int count,
>> return NULL;
>>
>> size = (unsigned long)count << PAGE_SHIFT;
>> - area = get_vm_area_caller(size, flags, __builtin_return_address(0));
>> + if (flags & VM_ALLOW_HUGE_VMAP) {
>> + /* determine from page array, the max alignment */
>> + unsigned long max_shift = max_contiguous_stride_order(pages, prot, count);
>> +
>> + area = __get_vm_area_node(size, 1 << max_shift, max_shift, flags,
>> + VMALLOC_START, VMALLOC_END, NUMA_NO_NODE,
>> + GFP_KERNEL, __builtin_return_address(0));
>> + } else {
>> + area = get_vm_area_caller(size, flags, __builtin_return_address(0));
>> + }
>> if (!area)
>> return NULL;
>>
>> addr = (unsigned long)area->addr;
>> - if (vmap_pages_range(addr, addr + size, pgprot_nx(prot),
>> - pages, PAGE_SHIFT) < 0) {
>> - vunmap(area->addr);
>> - return NULL;
>> +
>> + if (flags & VM_ALLOW_HUGE_VMAP) {
>> + if (__vmap_huge(pages, prot, addr, count)) {
>> + vunmap(area->addr);
>> + return NULL;
>> + }
>> + } else {
>> + if (vmap_pages_range(addr, addr + size, pgprot_nx(prot),
>> + pages, PAGE_SHIFT) < 0) {
>> + vunmap(area->addr);
>> + return NULL;
>> + }
>> }
>>
>> if (flags & VM_MAP_PUT_PAGES) {
>> @@ -4011,11 +4073,7 @@ void *__vmalloc_node_range_noprof(unsigned long size, unsigned long align,
>> * their allocations due to apply_to_page_range not
>> * supporting them.
>> */
>> -
>> - if (arch_vmap_pmd_supported(prot) && size >= PMD_SIZE)
>> - shift = PMD_SHIFT;
>> - else
>> - shift = arch_vmap_pte_supported_shift(size);
>> + shift = vm_shift(prot, size);
>
> What I actually did is different. In patches 1/8 and 2/8, I
> extended the arm64 levels to support N * CONT_PTE, and let the
> final PTE mapping use the maximum possible batch after avoiding
> zigzag. This further improves all orders greater than CONT_PTE.
>
> Thanks
> Barry
next prev parent reply other threads:[~2026-04-08 11:22 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-08 2:51 [RFC PATCH 0/8] mm/vmalloc: Speed up ioremap, vmalloc and vmap with contiguous memory Barry Song (Xiaomi)
2026-04-08 2:51 ` [RFC PATCH 1/8] arm64/hugetlb: Extend batching of multiple CONT_PTE in a single PTE setup Barry Song (Xiaomi)
2026-04-08 10:32 ` Dev Jain
2026-04-08 11:00 ` Barry Song
2026-04-08 2:51 ` [RFC PATCH 2/8] arm64/vmalloc: Allow arch_vmap_pte_range_map_size to batch multiple CONT_PTE Barry Song (Xiaomi)
2026-04-08 2:51 ` [RFC PATCH 3/8] mm/vmalloc: Extend vmap_small_pages_range_noflush() to support larger page_shift sizes Barry Song (Xiaomi)
2026-04-08 11:08 ` Dev Jain
2026-04-08 21:29 ` Barry Song
2026-04-08 2:51 ` [RFC PATCH 4/8] mm/vmalloc: Eliminate page table zigzag for huge vmalloc mappings Barry Song (Xiaomi)
2026-04-08 2:51 ` [RFC PATCH 5/8] mm/vmalloc: map contiguous pages in batches for vmap() if possible Barry Song (Xiaomi)
2026-04-08 4:19 ` Dev Jain
2026-04-08 5:12 ` Barry Song
2026-04-08 11:22 ` Dev Jain [this message]
2026-04-08 14:03 ` Dev Jain
2026-04-08 21:54 ` Barry Song
2026-04-08 2:51 ` [RFC PATCH 6/8] mm/vmalloc: align vm_area so vmap() can batch mappings Barry Song (Xiaomi)
2026-04-08 2:51 ` [RFC PATCH 7/8] mm/vmalloc: Coalesce same page_shift mappings in vmap to avoid pgtable zigzag Barry Song (Xiaomi)
2026-04-08 11:36 ` Dev Jain
2026-04-08 21:58 ` Barry Song
2026-04-08 2:51 ` [RFC PATCH 8/8] mm/vmalloc: Stop scanning for compound pages after encountering small pages in vmap Barry Song (Xiaomi)
2026-04-08 9:14 ` [RFC PATCH 0/8] mm/vmalloc: Speed up ioremap, vmalloc and vmap with contiguous memory Dev Jain
2026-04-08 10:51 ` Barry Song
2026-04-08 10:55 ` Dev Jain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0805d765-31af-49a0-acb4-8a72843f1213@arm.com \
--to=dev.jain@arm.com \
--cc=Xueyuan.chen21@gmail.com \
--cc=ajd@linux.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=anshuman.khandual@arm.com \
--cc=baohua@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=david@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=rppt@kernel.org \
--cc=ryan.roberts@arm.com \
--cc=urezki@gmail.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox