From: Usama Arif <usamaarif642@gmail.com>
To: Yosry Ahmed <yosryahmed@google.com>
Cc: akpm@linux-foundation.org, linux-mm@kvack.org,
hannes@cmpxchg.org, david@redhat.com, willy@infradead.org,
kanchana.p.sridhar@intel.com, nphamcs@gmail.com,
chengming.zhou@linux.dev, ryan.roberts@arm.com,
ying.huang@intel.com, 21cnbao@gmail.com, riel@surriel.com,
shakeel.butt@linux.dev, kernel-team@meta.com,
linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org
Subject: Re: [RFC 1/4] mm/zswap: skip swapcache for swapping in zswap pages
Date: Tue, 22 Oct 2024 20:59:55 +0100 [thread overview]
Message-ID: <032b5d28-68bb-4fea-91f7-e4a8bc4c4bb6@gmail.com> (raw)
In-Reply-To: <CAJD7tkYOGA2oQ=BSP3oXeV0Fh2=QRZZ=_5t2Wg6qrYZixCkZAg@mail.gmail.com>
On 21/10/2024 22:11, Yosry Ahmed wrote:
> On Fri, Oct 18, 2024 at 3:50 AM Usama Arif <usamaarif642@gmail.com> wrote:
>>
>> As mentioned in [1], there is a significant improvement in no
>> readahead swapin performance for super fast devices when skipping
>> swapcache.
>>
>> With large folio zswapin support added in later patches, this will also
>> mean this path will also act as "readahead" by swapping in multiple
>> pages into large folios. further improving performance.
>>
>> [1] https://lore.kernel.org/all/1505886205-9671-5-git-send-email-minchan@kernel.org/T/#m5a792a04dfea20eb7af4c355d00503efe1c86a93
>>
>> Signed-off-by: Usama Arif <usamaarif642@gmail.com>
>> ---
>> include/linux/zswap.h | 6 ++++++
>> mm/memory.c | 3 ++-
>> mm/page_io.c | 1 -
>> mm/zswap.c | 46 +++++++++++++++++++++++++++++++++++++++++++
>> 4 files changed, 54 insertions(+), 2 deletions(-)
>>
>> diff --git a/include/linux/zswap.h b/include/linux/zswap.h
>> index d961ead91bf1..e418d75db738 100644
>> --- a/include/linux/zswap.h
>> +++ b/include/linux/zswap.h
>> @@ -27,6 +27,7 @@ struct zswap_lruvec_state {
>> unsigned long zswap_total_pages(void);
>> bool zswap_store(struct folio *folio);
>> bool zswap_load(struct folio *folio);
>> +bool zswap_present_test(swp_entry_t swp, int nr_pages);
>> void zswap_invalidate(swp_entry_t swp);
>> int zswap_swapon(int type, unsigned long nr_pages);
>> void zswap_swapoff(int type);
>> @@ -49,6 +50,11 @@ static inline bool zswap_load(struct folio *folio)
>> return false;
>> }
>>
>> +static inline bool zswap_present_test(swp_entry_t swp, int nr_pages)
>> +{
>> + return false;
>> +}
>> +
>> static inline void zswap_invalidate(swp_entry_t swp) {}
>> static inline int zswap_swapon(int type, unsigned long nr_pages)
>> {
>> diff --git a/mm/memory.c b/mm/memory.c
>> index 03e5452dd0c0..49d243131169 100644
>> --- a/mm/memory.c
>> +++ b/mm/memory.c
>> @@ -4289,7 +4289,8 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
>> swapcache = folio;
>>
>> if (!folio) {
>> - if (data_race(si->flags & SWP_SYNCHRONOUS_IO) &&
>> + if ((data_race(si->flags & SWP_SYNCHRONOUS_IO) ||
>> + zswap_present_test(entry, 1)) &&
>> __swap_count(entry) == 1) {
>> /* skip swapcache */
>> folio = alloc_swap_folio(vmf);
>> diff --git a/mm/page_io.c b/mm/page_io.c
>> index 4aa34862676f..2a15b197968a 100644
>> --- a/mm/page_io.c
>> +++ b/mm/page_io.c
>> @@ -602,7 +602,6 @@ void swap_read_folio(struct folio *folio, struct swap_iocb **plug)
>> unsigned long pflags;
>> bool in_thrashing;
>>
>> - VM_BUG_ON_FOLIO(!folio_test_swapcache(folio) && !synchronous, folio);
>> VM_BUG_ON_FOLIO(!folio_test_locked(folio), folio);
>> VM_BUG_ON_FOLIO(folio_test_uptodate(folio), folio);
>>
>> diff --git a/mm/zswap.c b/mm/zswap.c
>> index 7f00cc918e7c..f4b03071b2fb 100644
>> --- a/mm/zswap.c
>> +++ b/mm/zswap.c
>> @@ -1576,6 +1576,52 @@ bool zswap_store(struct folio *folio)
>> return ret;
>> }
>>
>> +static bool swp_offset_in_zswap(unsigned int type, pgoff_t offset)
>> +{
>> + return (offset >> SWAP_ADDRESS_SPACE_SHIFT) < nr_zswap_trees[type];
>> +}
>> +
>> +/* Returns true if the entire folio is in zswap */
>> +bool zswap_present_test(swp_entry_t swp, int nr_pages)
>
> Also, did you check how the performance changes if we bring back the
> bitmap of present entries (i.e. what used to be frontswap's bitmap)
> instead of the tree lookups here?
>
I think the cost of tree lookup is not much and compared to zswap_decompress
can probably be ignored. zswap_present_test is essentially just xa_load for
the first entry, and then xas_next_entry for subsequent entries which is even
cheaper than xa_load.
next prev parent reply other threads:[~2024-10-22 20:00 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-18 10:48 [RFC 0/4] mm: zswap: add support for zswapin of large folios Usama Arif
2024-10-18 10:48 ` [RFC 1/4] mm/zswap: skip swapcache for swapping in zswap pages Usama Arif
2024-10-21 21:09 ` Yosry Ahmed
2024-10-22 19:49 ` Usama Arif
2024-10-23 0:45 ` Yosry Ahmed
2024-10-25 18:19 ` Nhat Pham
2024-10-25 19:10 ` Yosry Ahmed
2024-10-21 21:11 ` Yosry Ahmed
2024-10-22 19:59 ` Usama Arif [this message]
2024-10-23 0:47 ` Yosry Ahmed
2024-10-18 10:48 ` [RFC 2/4] mm/zswap: modify zswap_decompress to accept page instead of folio Usama Arif
2024-10-18 10:48 ` [RFC 3/4] mm/zswap: add support for large folio zswapin Usama Arif
2024-10-21 5:49 ` Barry Song
2024-10-21 10:44 ` Usama Arif
2024-10-21 10:55 ` Barry Song
2024-10-21 12:21 ` Usama Arif
2024-10-21 20:28 ` Barry Song
2024-10-21 20:57 ` Usama Arif
2024-10-21 21:34 ` Yosry Ahmed
2024-10-18 10:48 ` [RFC 4/4] mm/zswap: count successful large folio zswap loads Usama Arif
2024-10-21 5:09 ` [RFC 0/4] mm: zswap: add support for zswapin of large folios Barry Song
2024-10-21 10:40 ` Usama Arif
2024-10-22 15:26 ` Usama Arif
2024-10-22 20:46 ` Barry Song
2024-10-22 21:17 ` Usama Arif
2024-10-22 22:07 ` Barry Song
2024-10-23 10:26 ` Barry Song
2024-10-23 10:48 ` Usama Arif
2024-10-23 13:08 ` Usama Arif
2024-10-23 18:02 ` Yosry Ahmed
2024-10-23 18:31 ` Usama Arif
2024-10-23 18:52 ` Barry Song
2024-10-23 19:47 ` Usama Arif
2024-10-23 20:36 ` Barry Song
2024-10-23 23:35 ` Barry Song
2024-10-24 14:29 ` Johannes Weiner
2024-10-24 17:48 ` Barry Song
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=032b5d28-68bb-4fea-91f7-e4a8bc4c4bb6@gmail.com \
--to=usamaarif642@gmail.com \
--cc=21cnbao@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=chengming.zhou@linux.dev \
--cc=david@redhat.com \
--cc=hannes@cmpxchg.org \
--cc=kanchana.p.sridhar@intel.com \
--cc=kernel-team@meta.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=nphamcs@gmail.com \
--cc=riel@surriel.com \
--cc=ryan.roberts@arm.com \
--cc=shakeel.butt@linux.dev \
--cc=willy@infradead.org \
--cc=ying.huang@intel.com \
--cc=yosryahmed@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox