Re: [PATCH v4] mm: don't cap request size based on read-ahead setting

["Hillf Danton" <hillf.zj@alibaba-inc.com>]

On Friday, November 18, 2016 5:23 AM Jens Axboe wrote: 
> 
> We ran into a funky issue, where someone doing 256K buffered reads saw
> 128K requests at the device level. Turns out it is read-ahead capping
> the request size, since we use 128K as the default setting. This doesn't
> make a lot of sense - if someone is issuing 256K reads, they should see
> 256K reads, regardless of the read-ahead setting, if the underlying
> device can support a 256K read in a single command.
> 
> To make matters more confusing, there's an odd interaction with the
> fadvise hint setting. If we tell the kernel we're doing sequential IO on
> this file descriptor, we can get twice the read-ahead size. But if we
> tell the kernel that we are doing random IO, hence disabling read-ahead,
> we do get nice 256K requests at the lower level. This is because
> ondemand and forced read-ahead behave differently, with the latter doing
> the right thing. 

As far as I read, forced RA is innocent but it is corrected below. 
And with RA disabled, we should drop care of ondemand.

I'm scratching.

> An application developer will be, rightfully,
> scratching his head at this point, wondering wtf is going on. A good one
> will dive into the kernel source, and silently weep.
> 
> This patch introduces a bdi hint, io_pages. This is the soft max IO size
> for the lower level, I've hooked it up to the bdev settings here.
> Read-ahead is modified to issue the maximum of the user request size,
> and the read-ahead max size, but capped to the max request size on the
> device side. The latter is done to avoid reading ahead too much, if the
> application asks for a huge read. With this patch, the kernel behaves
> like the application expects.
> 
> Signed-off-by: Jens Axboe <axboe@fb.com>
> 
> ---
> 
> Changes since v3:
> 
> - Went over it with Johannes, cleaned up the the logic as a result
> 
> Changes since v2:
> 
> - Fix up the last minute typo on io_pages (Johannes/Hillf)
> - Apply the same limit to force_page_cache_readahead().
> 
> 
> diff --git a/block/blk-settings.c b/block/blk-settings.c
> index f679ae1..65f16cf 100644
> --- a/block/blk-settings.c
> +++ b/block/blk-settings.c
> @@ -249,6 +249,7 @@ void blk_queue_max_hw_sectors(struct request_queue
> *q, unsigned int max_hw_secto
>   	max_sectors = min_not_zero(max_hw_sectors, limits->max_dev_sectors);
>   	max_sectors = min_t(unsigned int, max_sectors, BLK_DEF_MAX_SECTORS);
>   	limits->max_sectors = max_sectors;
> +	q->backing_dev_info.io_pages = max_sectors >> (PAGE_SHIFT - 9);
>   }
>   EXPORT_SYMBOL(blk_queue_max_hw_sectors);
> 
> diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
> index 9cc8d7c..ea374e8 100644
> --- a/block/blk-sysfs.c
> +++ b/block/blk-sysfs.c
> @@ -212,6 +212,7 @@ queue_max_sectors_store(struct request_queue *q,
> const char *page, size_t count)
> 
>   	spin_lock_irq(q->queue_lock);
>   	q->limits.max_sectors = max_sectors_kb << 1;
> +	q->backing_dev_info.io_pages = max_sectors_kb >> (PAGE_SHIFT - 10);
>   	spin_unlock_irq(q->queue_lock);
> 
>   	return ret;
> diff --git a/include/linux/backing-dev-defs.h
> b/include/linux/backing-dev-defs.h
> index c357f27..b8144b2 100644
> --- a/include/linux/backing-dev-defs.h
> +++ b/include/linux/backing-dev-defs.h
> @@ -136,6 +136,7 @@ struct bdi_writeback {
>   struct backing_dev_info {
>   	struct list_head bdi_list;
>   	unsigned long ra_pages;	/* max readahead in PAGE_SIZE units */
> +	unsigned long io_pages;	/* max allowed IO size */
>   	unsigned int capabilities; /* Device capabilities */
>   	congested_fn *congested_fn; /* Function pointer if device is md/dm */
>   	void *congested_data;	/* Pointer to aux data for congested func */
> diff --git a/mm/readahead.c b/mm/readahead.c
> index c8a955b..344c1da 100644
> --- a/mm/readahead.c
> +++ b/mm/readahead.c
> @@ -207,12 +207,17 @@ int __do_page_cache_readahead(struct address_space
> *mapping, struct file *filp,
>    * memory at once.
>    */
>   int force_page_cache_readahead(struct address_space *mapping, struct
> file *filp,
> -		pgoff_t offset, unsigned long nr_to_read)
> +		               pgoff_t offset, unsigned long nr_to_read)
>   {
> +	struct backing_dev_info *bdi = inode_to_bdi(mapping->host);
> +	struct file_ra_state *ra = &filp->f_ra;
> +	unsigned long max_pages;
> +
>   	if (unlikely(!mapping->a_ops->readpage && !mapping->a_ops->readpages))
>   		return -EINVAL;
> 
> -	nr_to_read = min(nr_to_read, inode_to_bdi(mapping->host)->ra_pages);
> +	max_pages = max_t(unsigned long, bdi->io_pages, ra->ra_pages);
> +	nr_to_read = min(nr_to_read, max_pages);
>   	while (nr_to_read) {
>   		int err;
> 
> @@ -369,10 +374,18 @@ ondemand_readahead(struct address_space *mapping,
>   		   bool hit_readahead_marker, pgoff_t offset,
>   		   unsigned long req_size)
>   {
> -	unsigned long max = ra->ra_pages;
> +	struct backing_dev_info *bdi = inode_to_bdi(mapping->host);
> +	unsigned long max_pages = ra->ra_pages;
>   	pgoff_t prev_offset;
> 
>   	/*
> +	 * If the request exceeds the readahead window, allow the read to
> +	 * be up to the optimal hardware IO size
> +	 */
> +	if (req_size > max_pages && bdi->io_pages > max_pages)
> +		max_pages = min(req_size, bdi->io_pages);
> +
> +	/*
>   	 * start of file
>   	 */
>   	if (!offset)
> @@ -385,7 +398,7 @@ ondemand_readahead(struct address_space *mapping,
>   	if ((offset == (ra->start + ra->size - ra->async_size) ||
>   	     offset == (ra->start + ra->size))) {
>   		ra->start += ra->size;
> -		ra->size = get_next_ra_size(ra, max);
> +		ra->size = get_next_ra_size(ra, max_pages);
>   		ra->async_size = ra->size;
>   		goto readit;
>   	}
> @@ -400,16 +413,16 @@ ondemand_readahead(struct address_space *mapping,
>   		pgoff_t start;
> 
>   		rcu_read_lock();
> -		start = page_cache_next_hole(mapping, offset + 1, max);
> +		start = page_cache_next_hole(mapping, offset + 1, max_pages);
>   		rcu_read_unlock();
> 
> -		if (!start || start - offset > max)
> +		if (!start || start - offset > max_pages)
>   			return 0;
> 
>   		ra->start = start;
>   		ra->size = start - offset;	/* old async_size */
>   		ra->size += req_size;
> -		ra->size = get_next_ra_size(ra, max);
> +		ra->size = get_next_ra_size(ra, max_pages);
>   		ra->async_size = ra->size;
>   		goto readit;
>   	}
> @@ -417,7 +430,7 @@ ondemand_readahead(struct address_space *mapping,
>   	/*
>   	 * oversize read
>   	 */
> -	if (req_size > max)
> +	if (req_size > max_pages)
>   		goto initial_readahead;
> 
>   	/*
> @@ -433,7 +446,7 @@ ondemand_readahead(struct address_space *mapping,
>   	 * Query the page cache and look for the traces(cached history pages)
>   	 * that a sequential stream would leave behind.
>   	 */
> -	if (try_context_readahead(mapping, ra, offset, req_size, max))
> +	if (try_context_readahead(mapping, ra, offset, req_size, max_pages))
>   		goto readit;
> 
>   	/*
> @@ -444,7 +457,7 @@ ondemand_readahead(struct address_space *mapping,
> 
>   initial_readahead:
>   	ra->start = offset;
> -	ra->size = get_init_ra_size(req_size, max);
> +	ra->size = get_init_ra_size(req_size, max_pages);
>   	ra->async_size = ra->size > req_size ? ra->size - req_size : ra->size;
> 
>   readit:
> @@ -454,7 +467,7 @@ ondemand_readahead(struct address_space *mapping,
>   	 * the resulted next readahead window into the current one.
>   	 */
>   	if (offset == ra->start && ra->size == ra->async_size) {
> -		ra->async_size = get_next_ra_size(ra, max);
> +		ra->async_size = get_next_ra_size(ra, max_pages);
>   		ra->size += ra->async_size;
>   	}
> 
> 
> 
> --
> Jens Axboe

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>